All Notes (8)
recovered by David Aragon, Brian Buckingham, and Jess Leonard on SeaTow vessel Jennie Lee out of Atlantic City, NJ.
Comparison CTD cast done with RBR Conerto. pH water sampling done with single niskin bottle.
8/23 7 GMT
interaction
Strange overnight.
Gliders switched back to SFMC after what seemed like many failed calls to TWR modem. I think something went wrong with SFMC and/or modem portion.
Check this long surfacing ru40 log and XML script behavior. Missed a control F, also surfacing dialog repeat time seems too short. Also Ctrl F maybe goes a bit early, and verifyzrma seemed fast, is it necessary?
RUDICS outage starting last night around 7 est. Not sure resolution yet. Gliders on MODEM TWR backup
Turned compression on this morning.
Changed mission to no waypoint, will station keep to keep it aligned with ru39
Last night:
loadmission ru40.mi
load_mission(): Opening Mission file: ru40.mi
Setting SENSOR u_abort_min_burn_time(sec) value 600.000000
Setting SENSOR u_abort_max_burn_time(sec) value 64800.000000
Setting SENSOR u_reqd_depth_at_surface(m) value 2.000000
Setting SENSOR u_hd_fin_ap_run_time(secs) value 12.000000
Setting SENSOR u_hd_fin_ap_gain(1/rad) value 1.500000
Setting SENSOR u_hd_fin_ap_igain(1/rad-sec) value 0.015000
Setting SENSOR u_hd_fin_ap_dgain(sec/rad) value 8.000000
Setting SENSOR u_hd_fin_ap_hardover_holdoff(sec) value 30.000000
Setting SENSOR u_pitch_ap_gain(1/rad) value -1.000000
Setting SENSOR u_pitch_ap_dgain(s/rad) value -1.000000
Setting SENSOR u_pitch_ap_deadband(rad) value 0.052400
Setting SENSOR f_battpos_deadzone_width(inches) value 0.200000
Setting SENSOR f_battpos_db_frac_dz(nodim) value 0.500000
Setting SENSOR u_min_pitch_ap_period(sec) value 2.000000
Setting SENSOR u_max_pitch_ap_period(sec) value 60.000000
put u_reqd_depth_at_surface 2.75
ctd, oxygen optode, and ecopuck are set to sample every 8th yo for diving, hoving, and climbing
dmon and rxlive are set to sample diving, hoving, and climbing for every yo
GliderDos N -1 >loadmission ru40ini.mi
load_mission(): Opening Mission file: ru40ini.mi
Setting SENSOR u_hd_fin_ap_run_time(secs) value 12.000000
Setting SENSOR u_hd_fin_ap_gain(1/rad) value 1.500000
Setting SENSOR u_hd_fin_ap_igain(1/rad-sec) value 0.015000
Setting SENSOR u_hd_fin_ap_dgain(sec/rad) value 6.000000
Setting SENSOR u_hd_fin_ap_hardover_holdoff(sec) value 30.000000
Setting SENSOR u_pitch_ap_gain(1/rad) value -1.000000
Setting SENSOR u_pitch_ap_dgain(s/rad) value -1.000000
Setting SENSOR u_pitch_ap_deadband(rad) value 0.079000
Setting SENSOR f_battpos_deadzone_width(inches) value 0.200000
Setting SENSOR f_battpos_db_frac_dz(nodim) value 0.625000
Setting SENSOR u_min_pitch_ap_period(sec) value 12.000000
Setting SENSOR u_max_pitch_ap_period(sec) value 60.000000
Deployed by Nicole Waite, Chip Haldeman, Jessica Leonard, Annat Sonion, and Andrea John aboard RV Rutgers out of Morgan Marina, Sayreville, NJ.
Operating System: 10.08
Instruments:
Seabird pumped CTD
9878
8/21/2022
Wetlabs FLBBCDSLC
7659
7/14/2022
Aanderaa Optode Oxy4831
1037
6/15/2022
In-house check 8/8/23
WHOI DMON
044
Vemco RXLive
457140