Added the following to all surfac files:
## For fighting freshwater lenses
b_arg: c_stop_when_air_pump(bool) 1
b_arg: c_use_thruster(enum) 3
b_arg: c_thruster_value(X) -0.05

Changed c_bpump_value from 1000 to 260 in surfac10

Switched to SBDlist min

Switched to SBD min

10 days in averaging 4.5 amphr/day with CTD, optode, and AD2CP sampling full time.

Telemetry test doesn't appear to have worked.

Presently we're seeing ~5MB/day or ~625 kB/segment. CICESE has seen ~340 kB/segment with a somewhat similar configuration so this is some confirmation our set up isn't totally bogus.

Testing a telemetry leg because averaging settings seem to only be making ~5KB/day. Haven't really run non-burst mode so not sure if this is OK or not.

150 m dive with the following config:

## jgradone@marine.rutgers.edu 4/16/2024 Set up for RU29 ABC2DR Line

SETDEFAULT,ALL
SETINST,LED="OFF"
SETPLAN,MIAVG=5,AVG=1,DIAVG=0,VD=0,MV=10,SA=35.0,BURST=0,MIBURST=3600,DIBURST=0,SV=0.00,FN="RU29_ABC2DR.ad2cp",SO=0,FREQ=1000,NSTT=0
SETAVG,NC=15,CS=2.00,BD=0.20,CY="BEAM",PL=0.0,AI=1,VP=0.000,VR=2.50,DF=3,NPING=4,NB=4,CH=0,BW="BROAD",ALTI=0,BT=0,ICE=0,ALTISTART=0.10,ALTIEND=30.00,RAWALTI=0
SETTMAVG,EN=1,CD=1,PD=1,AVG=0,TV=1,TA=1,TC=1,CY="BEAM",FO=1,SO=0,DF=3,TPG=0
SETGLIDER,EN=1,GATEBT=0,DISHDR=0
SAVE,ALL


Also changed ad2cp.ini to have:

# The Maximum File Size attribute determines the maximum size of the xxx.ad2 telemetry file.
# This attribute limits the size of the xxx.ad2 telemetry file in 1 kilo byte blocks.
# n - maximum telemetry data file size in kilo bytes (default is a 10KB file size)
MAX_FILE_SIZE_KB: 200

4/19 15 GMT:
"-rw-rw-rw- 1 user 62133 Apr 19 14:47 2024 RU29_ABC2DR.ad2cp"
"-rw-rw-rw- 1 user 3744 Apr 19 14:31 2024 START.hdr"
"-rw-rw-rw- 1 user 2407 Apr 19 14:31 2024 RU29_ABC2DR.cfg"


4/24/14:30 GMT:

"-rw-rw-rw- 1 user 25628031 Apr 24 14:01 2024 RU29_ABC2DR.ad2cp"
"-rw-rw-rw- 1 user 3744 Apr 19 14:31 2024 START.hdr"
"-rw-rw-rw- 1 user 2407 Apr 19 14:31 2024 RU29_ABC2DR.cfg"
512,32768,15867674624,15927345152,15927345152

load_mission(): Opening Mission file: RU29.MI
Setting SENSOR u_abort_min_burn_time(sec) value 600.000000
Setting SENSOR u_abort_max_burn_time(sec) value 86400.000000
Setting SENSOR u_reqd_depth_at_surface(m) value 3.000000
Setting SENSOR u_thruster_burst_freq(hours) value 36.000000
Setting SENSOR u_hd_fin_ap_run_time(secs) value 12.000000
Setting SENSOR u_hd_fin_ap_gain(1/rad) value 1.500000
Setting SENSOR u_hd_fin_ap_igain(1/rad-sec) value 0.015000
Setting SENSOR u_hd_fin_ap_dgain(sec/rad) value 6.000000
Setting SENSOR u_hd_fin_ap_hardover_holdoff(sec) value 10.000000
Setting SENSOR u_pitch_ap_gain(1/rad) value -1.000000
Setting SENSOR u_pitch_ap_dgain(s/rad) value -1.000000
Setting SENSOR u_pitch_ap_deadband(rad) value 0.079000
Setting SENSOR f_battpos_deadzone_width(inches) value 0.200000
Setting SENSOR f_battpos_db_frac_dz(nodim) value 0.625000
Setting SENSOR u_min_pitch_ap_period(sec) value 30.000000
Setting SENSOR u_max_pitch_ap_period(sec) value 60.000000

AD2CP config:

## jgradone@marine.rutgers.edu 4/16/2024 Set up for RU29 ABC2DR Line

SETDEFAULT,ALL
SETINST,LED="OFF"
SETPLAN,MIAVG=5,AVG=1,DIAVG=0,VD=0,MV=10,SA=35.0,BURST=0,MIBURST=3600,DIBURST=0,SV=0.00,FN="RU29_ABC2DR.ad2cp",SO=0,FREQ=1000,NSTT=0
SETAVG,NC=15,CS=2.00,BD=0.20,CY="BEAM",PL=0.0,AI=1,VP=0.000,VR=2.50,DF=3,NPING=4,NB=4,CH=0,BW="BROAD",ALTI=0,BT=0,ICE=0,ALTISTART=0.10,ALTIEND=30.00,RAWALTI=0
SETGLIDER,EN=1,GATEBT=0,DISHDR=0
SAVE,ALL

SWOT-HD2 1k pump
Lithium Primary, 4-series batteries

Operating System: 8.3

Instruments:

Seabird GPCTD
9104
3/23/2023

Aanderaa Optode Oxy5013W
1296
7/25/2023
In-house cal: 3/12/2024

Nortek AD2CP
103365
7/22/2022