All Notes (11)
Recovered by Mike Brown out of Palmer Station
.tbd transfers ridiculously slow. Catching up file transfers manually every so often. :-(
Consci, send all .tbd's, back out and send .sbd's with a couple ctrl-E's seems to work. Otherwise file transfer practically hangs and glider disconnects, and files continue to back log.
u_alt_min_depth 2 on next surfacing via script. No need to worry about false hits here...and would like to avoid bottom sampling.
ru05 possibly mauled this segment:http://marine.rutgers.edu/~dkaragon/glider_profile_plotting/ru05/ru05_2016_034_1_0_Sampling.png
DBD analysis post mission would be great
bpump at -205 for dive, +175 for climb. Slowing it down to conserve energy.
2s sampling seems to have taken care of science overloading. CDOM puck looks like it might be bad though.
Switching to 25 m satisfying radius and 1 hour missions for box/station keeping around midpoint.
100_n.mi - no waypoint surfacing
Looks like science was overloaded, so sampling for optics backed off to 2 seconds. No PI input, so changed tbd to 6 seconds coming back to lower file sizes a bit.
Going to full depth and 2 hour missions on next surfacing. Needs tbdlist adjustment once PI input is received as filesizes are large.
Deployed off Station E by Mike Brown & crew. Some initial GPS issues (failure to update) caused some lengthy delays, but all seems fine now. Starting off on a cross canyon transect; currently 1 hr missions to 50 m; will adjust on next few surfacings.
ru05 with SB 0080 configured for CONVERGE/LTER 2014/2015 had the wrong calibration coefficients in the autoexec.mi file. See note below:
# 2015/09/10 email@example.com SB0080 was placed in glider for LTER(CONVERGE) 2014/2015 season. This payload has pucks BBFL2-337 and BB3-335
# The calibration coeffcients in the autoexec during those missions was for pucks BB3SLO-648 and BB2FLS-666
# 748, and 666 were associated with SB 0175 for California UCSB
# Changed coeffcients in autoexec.mi to the correct pucks, BBFL2-337 and BB3-335
# Changed ballast pump deadz width from 30 to 15 cc