Fleet Configurations
Deployments
Gliders
Projects
Payload Bays
Instruments
Users
API
Log In
Deployment ru31-20160113T1728
Pilot Notes
Confirmed ad2cp.cfg SciDos>type ad2cp.cfg # ad2cp_modified.cfg # verbatim commands sent to Nortek AD2CP on initialization # The customer should edit this file with their specific configuration # or configure the device externally and comment out these commands. # # 2015-05-20 mbrissette@teledyne.com Initial # # NOTE: Ensure that the AD2CP is configured for BAUD=19200 prior to glider installation: "SETINST,BR=19200" SETDEFAULT,ALL SETPLAN,AVG=1,SA=35.0,SV=0.0,MIAVG=15,MIBURST=15,FREQ=1000,BURST=1,SO=0,FN="Glider.ad2cp" SETAVG,NC=15,NB=4,CS=2.0,AI=1,BD=0.2,CY="BEAM",PL=0.0,VR=1.0,DF=3,NPING=1,CH=0,BT=1 SETBT,RANGE=30.0,VR=5.0,NB=4,CH=0,DF=20,PL=-20.0 SETBURST,NC=15,NB=4,CS=2.0,BD=0.2,CY="BEAM",PL=0.0,SR=8.0,NS=8,VP=0,VR=1.0,DF=3,NPING=1,CH=0,VR5=3.0,ALTI=0,BT=0 SETGLIDER,EN=1,GATEBT=0 SETTMAVG,EN=1,PD=1,CY="BEAM",FO=1,SO=0,DF=3 SETTMBT,EN=1,SO=0,FO=1,DF=20,NPING=1,CY="BEAM",FOMTH=0 SAVE,ALL
Category
Informational
Alert
Action Needed
Action Taken
Operations
Update
Credentials Required
Username
Password