SVS clock sync was + 13 sec vs GMT time on 10/18/2017

SYSTEM TIME: 19:08:03 10/18/2017
GMT from website 19:07:50

recovered by Chip and Joe on NJDEP boat out of Atlantic City.

retasked to head back in shore towards recovery location

turning wave sensor on for 1 segment each day.

svs off. Heading back inshore to resume the NJDEP sampling line.

CC on. Station keep south of Barnegat Buoy. Wave sensor back on.

LISST to -6 every 6th, optics just downcast

LISST every 3rd yo, CC off moving towards Barnegat buoy. May change optics to just downs, perhaps LISST to every 6th yo.

Station keep for storm

svs settings from deployment, checked today (note time)

Time 23:10:10 9/19/2017

IDENTITY SVS-603

VOLTAGE 15.21

VERSION 1.7

BAUDSER 9600

AVR 33

INTERVAL 10101

TSTEP 0.3333

COFF 20.00

EFRAMEXY 1

EFRAMEZ 1

MAGHEADING 0

DANG 0.00

OFFSETZ 0.00

OUTPUTUSB 0000

OUTPUTSER 00FE

LOG 07

POLLING 0

SPECUSB 0

SPECSER 0

RECAL 1

SUMMARYUSB 0

SUMMARYSER 1

RESETCOUNT 72

DIRAVRFAC 1
CALSTATUS 3313
SD CARD READY
OUTPUTUSB HEADER:
NO OUTPUT
OUTPUTSER HEADER:

Surface test inconclusive, not enough density in data.

Theory is maybe it climbed super steep and that caused a pitch battery stuck condition.

Backed off to 5.5 m off bottom, think wave action caused some sample events.

Wave sensor turned on roughly 12 to 11 est.

We found fin, lisst, vmt, are vertical at attitude_rev = +3 deg roll.

We found fin, lisst, vmt, are vertical at attitude_rev = +3 deg roll.

2 hour missions

SVL off

Deployed by Josh, Nicole, Christian, Tony aboard NJDEP vessel out of Belmar.

initial 10 min mission, no accel, 2nd 10 min mission, accel turned on.

loadmission ru28.mi

GPCTD 103P
FLBBCD 2797
OPTODE 3835 SN 971 (previous optode cable failed, noticed in lab)
LISST SN 01
SVS603 SN ?? (00?) Firmware 1.7
VMT SN 1144951