Fleet Configurations
Deployments
Gliders
Projects
Payload Bays
Instruments
Users
API
Log In
Deployment ru29-20200908T1623
Pilot Notes
Echosounder mode turned on finally: # ad2cp_modified.cfg # # 2015-05-20 mbrissette@teledyne.com Initial # 2020-08-13 tnmiles@marine.rutgers.edu 04040000.mlg # NOTE: Trying an echo setup from Sven that in theory works... # RAW should be 0 # ad2cp.cfg.echo.working test 4 # 2020/08/20 dkaragon original file Glider.ad2cp had decoding problems, changing name to test_6_echo, also testing no LED # 2020/09/21 dkaragon not sure if this is original comments but included them as a guess. Commands are from miles/sven emails 9/21/2020. # 2020/9/21 730pmest dkaragon MIBURST=6 instead of MIBURST=4; long comment causing problem? # 2020/9/22 sven/miles - MIBURST is total interval, SR sample rate used for NS samples; 16 slots/sec: MIBURST 4 from 6, SR 4 from 4 SETDEFAULT,ALL SETINST,LED="OFF" SETPLAN,MIAVG=10,AVG=0,SA=35,BURST=1,MIBURST=4,SV=0,FN="burst_echo_01.ad2cp",SO=0,FREQ=1000,NSTT=0 SETBURST,NC=40,NB=4,CS=0.5,BD=0.2,CY="BEAM",PL=0,SR=4,NS=8,VR=1,DF=3,NPING=2,CH=0,VR5=3,ALTI=0,BT=0,ECHO=1,HR=0,HR5=0 SETECHO,NC=2491,BINSIZE=0.012,BD=0.1,DF=3,FREQ1=1000,NBINF1=1,XMIT1=0.5,PL1=0,PULSECOMP1=1,CH1=1,RAW1=0,FREQ2=1000,NBINF2=1,XMIT2=0.1,PL2=0,PULSECOMP2=0,CH2=3,RAW2=0,FREQ3=0,NBINF3=1,XMIT3=0.016,PL3=0,PULSECOMP3=0,CH3=0,RAW3=0 SETGLIDER,EN=1,GATEBT=0 SAVE,ALL
Category
Informational
Alert
Action Needed
Action Taken
Operations
Update
Credentials Required
Username
Password