Connection Event: Carrier Detect found.199941 Iridium console active and ready... Vehicle Name: ru34 Curr Time: Thu Mar 13 22:32:54 2025 MT: 199941 DR Location: 4101.739 N -7111.998 E measured 1662.27 secs ago GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago GPS Invalid : 4102.213 N -7111.707 E measured 1714.23 secs ago GPS Location: 4101.739 N -7111.998 E measured 1663.97 secs ago sensor:c_wpt_lat(lat)=4059.9503 15402.2 secs ago sensor:c_wpt_lon(lon)=-7110.5877 15402.2 secs ago sensor:m_battery(volts)=16.1326572879881 3.747 secs ago sensor:m_coulomb_amphr(amp-hrs)=19.301152 3.843 secs ago sensor:m_coulomb_amphr_total(amp-hrs)=19.7224019999999 3.847 secs ago sensor:m_depth(m)=0.451699964751269 3.658 secs ago sensor:m_digifin_leakdetect_reading(nodim)=1023 0.046 secs ago sensor:m_gps_mag_var(rad)=0.251327412287183 1664.02 secs ago sensor:m_iridium_attempt_num(nodim)=1 44.44 secs ago sensor:m_iridium_call_num(nodim)=7718 0.057 secs ago sensor:m_iridium_dialed_num(nodim)=9936 16.223 secs ago sensor:m_leakdetect_voltage(volts)=2.49035409035409 7.7 secs ago sensor:m_leakdetect_voltage_forward(volts)=2.48153235653236 7.664 secs ago sensor:m_leakdetect_voltage_science(volts)=2.48058608058608 7.629 secs ago sensor:m_tot_num_inflections(nodim)=170192 1726.52 secs ago sensor:m_vacuum(inHg)=9.59242153846154 3.748 secs ago sensor:m_water_vx(m/s)=-0.276657003823273 1305.91 secs ago sensor:m_water_vy(m/s)=0.076018233219672 1305.92 secs ago sensor:u_max_altimeter(m)=50 1e+308 secs ago sensor:u_min_water_depth(m)=0 1e+308 secs ago sensor:u_use_current_correction(nodim)=1 1e+308 secs ago sensor:x_last_wpt_lat(lat)=4102.9752 15402.3 secs ago sensor:x_last_wpt_lon(lon)=-7110.701 15402.3 secs ago ABORT HISTORY: total since reset: 1 ABORT HISTORY: last abort cause: MS_ABORT_OVERDEPTH ABORT HISTORY: last abort details: ABORT HISTORY: last abort time: 2025-03-11T12:19:20 ABORT HISTORY: last abort segment: ru34-2025-069-0-0 (0353.0000) ABORT HISTORY: last abort mission: od.mi GliderDos N -1 >199941 No login script found for processing. sequence -resume SEQUENCE 50_n.mi(8) Sequencing missions load_mission(): Opening Mission file: 50_n.mi for execution 8 times Validated SENSOR c_science_send_all(bool) value 0.000000 Validated SENSOR c_science_all_on_enabled(bool) value 0.000000 Validated SENSOR u_dbd_sensor_list_xmit_control(enum) value 3.000000 Validated SENSOR u_sci_dbd_sensor_list_xmit_control(enum) value 2.000000 load_mission(): Opening Mission file: lastgasp.mi for execution FOREVER Validated SENSOR u_pitch_motor_test_availability(bool) value 0.000000 1 mission specifiers - sequencing 8 total missions (not counting lastgasp.mi): 50_n.mi(8) lastgasp.mi ABORT HISTORY: total since reset: 1 ABORT HISTORY: last abort cause: MS_ABORT_OVERDEPTH ABORT HISTORY: last abort details: ABORT HISTORY: last abort time: 2025-03-11T12:19:20 ABORT HISTORY: last abort segment: ru34-2025-069-0-0 (0353.0000) ABORT HISTORY: last abort mission: od.mi Vehicle Name: ru34 SEQUENCE: About to run 50_n.mi on try 0 You have 240 seconds to type a control-C to terminate the sequence. The control-P character immediately starts the mission. All other characters are ignored. ^C Heard a Control-C, terminating the sequence GliderDos N -1 > GliderDos N -1 >consci GLD: science IS running Choosing console...using IRIDIUM CONSCI REQUESTED (using IRIDIUM as console) GliderDos N -1 >ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s 199989 46 Neutering the Freewave Console SciDos>cd config c:/config SciDos>dir Directory of c:/config/ ./ ../ ad2cp.cfg 826 2024-08-29 14:12:40 ad2cp.ini 4766 2024-08-29 14:12:40 amar.ini 2466 2024-08-29 14:12:40 appcmd.dat 12 2024-08-29 14:12:40 azfp.cfg 1464 2024-08-29 14:12:40 azfp.ini 2309 2024-08-29 14:12:40 c3sfl.ini 1785 2024-08-29 14:12:40 dellog.dat 541 2024-08-29 14:12:40 dvl.ini 1290 2024-08-29 14:12:40 echo853.ini 3899 2024-08-29 14:12:40 echodrd.ini 2537 2024-08-29 14:12:40 ek80.cfg 653 2024-08-29 14:12:40 ek80.ini 2551 2024-08-29 14:12:40 highdens.dat 0 2024-08-29 14:12:40 lisst.cfg 815 2024-08-29 14:12:40 lisst.ini 1934 2024-08-29 14:12:40 lms.ini 1557 2024-08-29 14:12:40 nbdlist.dat 1933 2025-03-07 14:55:44 obsvr.ini 2565 2025-02-28 21:05:58 obsvr.ori 2557 2025-02-28 20:59:02 proglets.dat 4454 2024-10-14 19:39:42 sbe41nph.ini 2172 2024-08-29 14:12:40 solocam.cfg 1876 2024-08-29 14:12:40 solocam.ini 4231 2024-08-29 14:12:40 suna.ini 4092 2024-08-29 14:12:40 tau.ini 2191 2024-08-29 14:12:40 tbdlist.dat 1571 2025-03-11 22:24:10 uRider.cfg 1629 2024-08-29 14:12:40 uRider.ini 5984 2024-08-29 14:12:40 VR2C_CFG.0 1761 2024-11-18 20:29:30 VR2C_CFG.1 1709 2024-08-29 14:12:40 vro.cfg 1116 2024-08-29 14:12:40 vro.ini 3837 2024-08-29 14:12:40 wetlabsA.ini 2149 2024-08-29 14:12:40 wetlabsB.ini 2149 2024-08-29 14:12:40 wetlabsC.ini 2149 2024-08-29 14:12:40 zmext.dat 621 2024-08-29 14:12:40 39 files SciDos>type obsvr.ini # This is the Jasco, Observer Hydrophone, OBSVR proglet initialization file # # This file is used to configure proglet specific parameters, # configuration parameters take the format: # : # # ################################################################################# # The following parameters should only be changed when directed by Teledyne support # ################################################################################# # The Surface Request parameter is used to control a surface request by the # observer; message ID 0x09 # 0 Disabled, Do not act on a Surface Request message from Observer # 1 Act on Surface Request message at next reasonable opportunity # 2 Act on Surface Request message now SURFACE_REQUEST: 0 # The Diag Level parameter is used to capture diagnostic information, this should only # be changed at Teledynes request. When the diag level is > 0, output is generated to # the science terminal and the science NLG file. # 0 - DIAG_LEVEL_OFF, normal mode of operation, errors are reported. # 1 - DIAG_LEVEL_1, proglet trace info. # 2 - DIAG_LEVEL_2, DIAG_LEVEL1 + device message tracing. DIAG_LEVEL: 2 # The Number of Errors attribute determines how many errors will be detected before # a failing status is returned and a restart is generated. # n - Number of acceptable errors. NUM_ERRORS: 96969 # The Power Wait Seconds attribute determines how long the proglet waits before communicating # with the device after enabling power. # n - seconds to wait before accessing the device after enabling power. POWER_UP_MAX_WAIT_SECS: 165 # The Message Response Timeout Seconds attribute determines how long the proglet will # wait for a response from the device. # n - maximum seconds to wait for a response before generating an error. MSG_RESPONSE_TIMEOUT_SECS: 10 # The Telemetry Update Interval Seconds attribute determines how ofter the telemetry data # is sent to the device # n -