Connection Event: Carrier Detect found.2342117 Iridium console active and ready... Vehicle Name: ru29 Curr Time: Tue May 28 15:58:58 2024 MT: 2342111 DR Location: 1540.189 N -6900.150 E measured 973.429 secs ago GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago GPS Invalid : 1537.359 N -6860.000 E measured 1032.92 secs ago GPS Location: 1540.189 N -6900.150 E measured 975.874 secs ago sensor:c_wpt_lat(lat)=1600.001 176567 secs ago sensor:c_wpt_lon(lon)=-6900 176567 secs ago sensor:m_battery(volts)=14.8016112007726 9.384 secs ago sensor:m_coulomb_amphr(amp-hrs)=176.17512512207 9.572 secs ago sensor:m_coulomb_amphr_total(amp-hrs)=182.423189122147 9.593 secs ago sensor:m_depth(m)=0.312715584977785 9.483 secs ago sensor:m_digifin_leakdetect_reading(nodim)=1022 0.657 secs ago sensor:m_gps_mag_var(rad)=0.195476876223365 976.394 secs ago sensor:m_iridium_attempt_num(nodim)=1 42.916 secs ago sensor:m_iridium_call_num(nodim)=7607 0.726 secs ago sensor:m_iridium_dialed_num(nodim)=13185 14.84 secs ago sensor:m_leakdetect_voltage(volts)=2.47777777777778 51.671 secs ago sensor:m_leakdetect_voltage_forward(volts)=2.48547008547009 51.696 secs ago sensor:m_leakdetect_voltage_science(volts)=-1 10.049 secs ago sensor:m_tot_num_inflections(nodim)=35020 1026.39 secs ago sensor:m_vacuum(inHg)=8.5615561050061 10.019 secs ago sensor:m_water_vx(m/s)=0.0150153876751773 979.243 secs ago sensor:m_water_vy(m/s)=0.117501216728383 979.292 secs ago sensor:u_alt_min_depth(m)=2 1e+308 secs ago sensor:u_min_water_depth(m)=0 1e+308 secs ago sensor:u_use_current_correction(nodim)=1 1e+308 secs ago sensor:x_last_wpt_lat(lat)=1500.001 176568 secs ago sensor:x_last_wpt_lon(lon)=-6900 176568 secs ago ABORT HISTORY: total since reset: 1 ABORT HISTORY: last abort cause: MS_ABORT_OVERDEPTH ABORT HISTORY: last abort details: ABORT HISTORY: last abort time: 2024-04-19T14:25:20 ABORT HISTORY: last abort segment: ru29-2024-109-1-0 (0692.0000) ABORT HISTORY: last abort mission: OD5.MI 2342119 No login script found for processing. 2342119 DRIVER_ODDITY:iridium:1684:xxx_ctrl() ran too long ^TCONSCI REQUESTED (using IRIDIUM as console) The process of switching your console to science has begun. This make take a few seconds 2342136 85 behavior surface_2: SUBSTATE 7 ->8 : User is talking to science ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(28800)s 2342137 Neutering the Freewave Console sci_shell Version 8.5 2020-09 Added Williamson Camera(solocam) proglet SciDos>uart 2 19200 0 -b Bad command or file name SciDos>u4stalk 2 19200 0 -b ERROR:bit_num arg (-B) is NOT a number Usage: u4stalk ? prints this message Usage: u4stalk -h prints pin location information Usage: u4stalk port baud_rate [-|a|b ... |z] [bit_num ... bit_num] [-leave_uart_open] [-leave_bits_high] [-intr_char_timeout_secs X] Program Version 1.1 Version 8.5 2020-09 Connects stdin/stdout to the specified uart port (0-7) at baud_rate, i.e. it is a terminal emulator. User may specifiy an alternate control character (a-z) to exit (default: c). -or- NO control character (-) to exit. Drop freewave power to stop this is alternative way to get binary data thru u4stalk All the bit_num are raised (set high), Type Ctrl-C (or alternate) and hit NO keys for 1 secs to exit this program. -intr_char_timeout_secs X will change required 1 seconds to X In SciDos, program exits if carrier detect is lowered for 3 seconds. return 0; from main() ---------------------------------------------------------------------- SciDos>u4stalk =h ERROR:Not enough command line arguments Usage: u4stalk ? prints this message Usage: u4stalk -h prints pin location information Usage: u4stalk port baud_rate [-|a|b ... |z] [bit_num ... bit_num] [-leave_uart_open] [-leave_bits_high] [-intr_char_timeout_secs X] Program Version 1.1 Version 8.5 2020-09 Connects stdin/stdout to the specified uart port (0-7) at baud_rate, i.e. it is a terminal emulator. User may specifiy an alternate control character (a-z) to exit (default: c). -or- NO control character (-) to exit. Drop freewave power to stop this is alternative way to get binary data thru u4stalk All the bit_num are raised (set high), Type Ctrl-C (or alternate) and hit NO keys for 1 secs to exit this program. -intr_char_timeout_secs X will change required 1 seconds to X In SciDos, program exits if carrier detect is lowered for 3 seconds. return 0; from main() ---------------------------------------------------------------------- SciDos>u4stalk -h UART pin locations: Port# Description 0 SBMB:J0 1 SBMB:J1 2 SBMB:J2 3 SBMB:J3 4 SBMB:J4 5 SBMB:J5 6 SBMB:J6 7 SBMB:J7 DIGITAL BIT PIN LOCATION: Looking down at persistor pins with 5x2 white box on left: 2 .............................. 50 1 .............................. 49 All the pins with white boxes: 2 4 6 8 10 20 30 40 50 1 3 5 7 9 15 25 35 45 return 0; from main() ---------------------------------------------------------------------- SciDos>u4stalk 2 19200 0 b ERROR:bit_num arg (B) is NOT a number Usage: u4stalk ? prints this message Usage: u4stalk -h prints pin location information Usage: u4stalk port baud_rate [-|a|b ... |z] [bit_num ... bit_num] [-leave_uart_open] [-leave_bits_high] [-intr_char_timeout_secs X] Program Version 1.1 Version 8.5 2020-09 Connects stdin/stdout to the specified uart port (0-7) at baud_rate, i.e. it is a terminal emulator. User may specifiy an alternate control character (a-z) to exit (default: c). -or- NO control character (-) to exit. Drop freewave power to stop this is alternative way to get binary data thru u4stalk All the bit_num are raised (set high), Type Ctrl-C (or alternate) and hit NO keys for 1 secs to exit this program. -intr_char_timeout_secs X will change required 1 seconds to X In SciDos, program exits if carrier detect is lowered for 3 seconds. return 0; from main() ---------------------------------------------------------------------- SciDos>u4stalk e 2 19200 0 ERROR:Port arg (E) is NOT a number Usage: u4stalk ? prints this message Usage: u4stalk -h prints pin location information Usage: u4stalk port baud_rate [-|a|b ... |z] [bit_num ... bit_num] [-leave_uart_open] [-leave_bits_high] [-intr_char_timeout_secs X] Program Version 1.1 Version 8.5 2020-09 Connects stdin/stdout to the specified uart port (0-7) at baud_rate, i.e. it is a terminal emulator. User may specifiy an alternate control character (a-z) to exit (default: c). -or- NO control character (-) to exit. Drop freewave power to stop this is alternative way to get binary data thru u4stalk All the bit_num are raised (set high), Type Ctrl-C (or alternate) and hit NO keys for 1 secs to exit this program. -intr_char_timeout_secs X will change required 1 seconds to X In SciDos, program exits if carrier detect is lowered for 3 seconds. return 0; from main() ---------------------------------------------------------------------- SciDos>u4stalk 2 19200 0 U4STALK: Program Version 1.1 Version 8.5 2020-09 Using uart port 2 at 19200 baud Raising a total of 1 bit(s): 0 ---------------------------------------------------------------------- Opening port 2:SBMB:J2 19200 baud, N81, line buf: 0, no input data timeout(secs): disabled in queue size: 204800, out queue size: 2048 sci_uart_drain_input(2): sci_uart_drain_input:Drained 0 chars Opening Bit(0) for output Bit(0) use count is now 1. Bit(0) raise count is now 0. bit_shared_raise(): Raising bit(0). All the setup is done. Beginning emulation.... To exit this program: Drop Carrier Detect for 3 seconds (i.e. unpower freewave) --or--Type Ctrl-C and hit NO keys for 1 secs. ---------------------------------------------------------------------- ERROR CONFIRM OK ERROR Glider - NORTEK AS. Version 3055_10 (Apr 15 2021 07:40:42) COMMAND MODE OK ERROR "-rw-rw-rw- 1 user 204141910 May 28 16:02 2024 RU29_ABC2DR.ad2cp" "-rw-rw-rw- 1 user 3744 Apr 19 14:31 2024 START.hdr" "-rw-rw-rw- 1 user 2407 Apr 19 14:31 2024 RU29_ABC2DR.cfg" "-rw-rw-rw- 1 user 124938 May 28 04:44 2024 telemetryfile.bin" OK 512,32768,15689056256,15927345152,15927345152 OK ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR