Connection Event: Carrier Detect found.201342 Iridium console active and ready... Vehicle Name: ru40 Curr Time: Fri Aug 25 00:37:34 2023 MT: 201342 DR Location: 3933.163 N -7300.059 E measured 587.263 secs ago GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago GPS Invalid : 3932.952 N -7259.455 E measured 643.438 secs ago GPS Location: 3933.163 N -7300.059 E measured 589.314 secs ago sensor:c_wpt_lat(lat)=3933.476 3129.79 secs ago sensor:c_wpt_lon(lon)=-7259.514 3129.79 secs ago sensor:m_battery(volts)=16.0765603939434 510.371 secs ago sensor:m_coulomb_amphr(amp-hrs)=34.424954 3.803 secs ago sensor:m_coulomb_amphr_total(amp-hrs)=34.406204 3.807 secs ago sensor:m_depth(m)=0 3.709 secs ago sensor:m_digifin_leakdetect_reading(nodim)=1023 0.047 secs ago sensor:m_gps_mag_var(rad)=0.228638132011257 589.361 secs ago sensor:m_iridium_attempt_num(nodim)=1 36.044 secs ago sensor:m_iridium_call_num(nodim)=625 0.058 secs ago sensor:m_iridium_dialed_num(nodim)=1122 12.052 secs ago sensor:m_leakdetect_voltage(volts)=2.5 510.266 secs ago sensor:m_leakdetect_voltage_forward(volts)=2.49233821733822 510.23 secs ago sensor:m_leakdetect_voltage_science(volts)=2.49444444444444 510.195 secs ago sensor:m_tot_num_inflections(nodim)=14791 683.446 secs ago sensor:m_vacuum(inHg)=8.73034102564102 510.374 secs ago sensor:m_water_vx(m/s)=-0.031946764136014 607.357 secs ago sensor:m_water_vy(m/s)=-0.142321314939684 607.361 secs ago sensor:u_max_altimeter(m)=200 1e+308 secs ago sensor:u_min_water_depth(m)=0 1e+308 secs ago sensor:u_use_current_correction(nodim)=1 1e+308 secs ago sensor:x_last_wpt_lat(lat)=3932.823 3129.88 secs ago sensor:x_last_wpt_lon(lon)=-7300.016 3129.88 secs ago ABORT HISTORY: total since reset: 2 ABORT HISTORY: last abort cause: MS_ABORT_BEH_ERROR ABORT HISTORY: last abort details: layered_control(): Behavior surface_3 entered B_ERROR state ABORT HISTORY: last abort time: 2023-08-22T16:37:07 ABORT HISTORY: last abort segment: ru40-2023-233-0-10 (0086.0010) ABORT HISTORY: last abort mission: 100_n.mi 201342 No login script found for processing. 201424 74 SCI ERROR: science start logging failed GLD: ERROR resuming logging -------------------------------- Error from CmdDispatch():Error sending files 201424 ERROR behavior surface_3: S COMMAND FAILED: s -num=5 *.sbd *.tbd *.tcd *.scd *.vem *.azf *.asc *.obs *.mrd 201481 88 SCI:PROGLET house_elf begin() called 201481 SCI: house_elf: Version 1.2 201481 SCI:PROGLET ctd41cp begin() called 201481 SCI: ctd41cp: Version 0.2 201481 SCI: ctd41cp: Will be sending the following data to glider: 201481 SCI: sci_water_cond(s/m) 201481 SCI: sci_water_temp(degc) 201481 SCI: sci_water_pressure(bar) 201481 SCI: sci_ctd41cp_timestamp(timestamp) 201481 SCI:PROGLET flbbcd begin() called 201481 SCI: flbbcd: Version 0.0 201481 SCI: flbbcd: Will be sending following data to glider: 201481 SCI: sci_flbbcd_chlor_units(ug/l) 201481 SCI: sci_flbbcd_bb_units(nodim) 201481 SCI: sci_flbbcd_cdom_units(ppb) 201481 SCI: sci_flbbcd_chlor_sig(nodim) 201481 SCI: sci_flbbcd_bb_sig(nodim) 201481 SCI: sci_flbbcd_cdom_sig(nodim) 201481 SCI: sci_flbbcd_chlor_ref(nodim) 201481 SCI: sci_flbbcd_bb_ref(nodim) 201481 SCI: sci_flbbcd_cdom_ref(nodim) 201481 SCI: sci_flbbcd_therm(nodim) 201481 SCI: sci_flbbcd_timestamp(timestamp) 201481 SCI:Bit(0) raise count is now 0. 201481 SCI:Bit(0) raise count is now 0. 201481 SCI:PROGLET oxy4 begin() called 201481 SCI: oxy4: Version 0.0 201481 SCI: oxy4: Will be sending following data to glider: 201481 SCI: sci_oxy4_oxygen(um) 201481 SCI: sci_oxy4_saturation(%) 201481 SCI: sci_oxy4_temp(degc) 201481 SCI: sci_oxy4_calphase(deg) 201481 SCI: sci_oxy4_tcphase(deg) 201481 SCI: sci_oxy4_c1rph(deg) 201481 SCI: sci_oxy4_c2rph(deg) 201481 SCI: sci_oxy4_c1amp(mv) 201481 SCI: sci_oxy4_c2amp(mv) 201481 SCI: sci_oxy4_rawtemp(mv) 201481 SCI: sci_oxy4_timestamp(timestamp) 201481 SCI:Bit(2) raise count is now 0. 201481 SCI:Bit(2) raise count is now 0. 201481 SCI:PROGLET vr2c begin() called 201481 SCI:PROGLET dmon begin() called 201481 SCI: dmon: Version 0.0 201481 SCI: dmon: Will be sending following data to glider: 201481 SCI: sci_dmon_msg_byte_count(nodim) 201482 SCI:PROGLET house_elf start() called 201482 SCI: house_elf_run(): 0 error(s) in a row. (5 is fatal) 201482 SCI: house_elf_run(): 0 error(s) since house_elf_begin(). (50 is fatal) 201482 SCI:PROGLET vr2c start() called 201482 SCI: vr2c_run(): 0 error(s) in a row. (5 is fatal) 201482 SCI: vr2c_run(): 0 error(s) since vr2c_begin(). (50 is fatal) SCI ERROR: timed out waiting for science to stop logging201547 4 ERROR behavior surface_3: Error from prepare_to_start_next_logging_segment() 201547 behavior surface_3: STATE Active -> ERROR 201547 ERROR behavior surface_3: Entered B_ERROR State !201547 ERROR behavior ?_-1: layered_control(): Behavior surface_3 entered B_ERROR state 201549 ERROR behavior ?_-1: abort_the_mission(0): (6)MS_ABORT_BEH_ERROR 201549 behavior ?_-1: abort_the_mission(): Changing U_CYCLE_TIME from 4.000000 to 15.000000 201549 save_and_change_sensors().... Changed u_depth_rate_filter_factor from 4 to -1 201549 Attempting to put everything back into service 201549 behavior ?_-1: Vehicle Name: ru40 201549 behavior ?_-1: abort_the_mission(): (6)MS_ABORT_BEH_ERROR 201549 behavior ?_-1: secs since abort started: 0 try num: 0 201549 behavior ?_-1: depths ini: 0 working: 102 at risk: 221 crush: 225 201549 behavior ?_-1: expected time/tries to surface: 300 20 201549 behavior ?_-1: max time/tries to go up: 300 20 201549 behavior ?_-1: too long: 0, not going up: 0, depth sensor busted:0 201549 behavior ?_-1: abort burn time/tries min: 600 40 201549 behavior ?_-1: abort burn time/tries max: 64800 4320 201549 behavior ?_-1: ABOVE WORKING DEPTH 201549 behavior ?_-1: drop_the_weight = 0 201549 Not recommended, but if in infinite loop, hit Control-C 201551 sensor: m_depth = 0 m 201552 5 Attempting to put only critical devices back into service 201552 behavior ?_-1: Vehicle Name: ru40 201552 behavior ?_-1: abort_the_mission(): (6)MS_ABORT_BEH_ERROR 201552 behavior ?_-1: secs since abort started: 2 try num: 1 201552 behavior ?_-1: depths ini: 0 working: 102 at risk: 221 crush: 225 201552 behavior ?_-1: expected time/tries to surface: 300 20 201552 behavior ?_-1: max time/tries to go up: 300 20 201552 behavior ?_-1: too long: 0, not going up: 0, depth sensor busted:0 201552 behavior ?_-1: abort burn time/tries min: 600 40 201552 behavior ?_-1: abort burn time/tries max: 64800 4320 201552 behavior ?_-1: ABOVE WORKING DEPTH 201552 behavior ?_-1: drop_the_weight = 0 201552 Not recommended, but if in infinite loop, hit Control-C 201553 sensor: m_depth = 0 m 201567 6 Attempting to put only critical devices back into service 201567 behavior ?_-1: Vehicle Name: ru40 201567 behavior ?_-1: abort_the_mission(): (6)MS_ABORT_BEH_ERROR 201567 behavior ?_-1: secs since abort started: 17 try num: 2 201567 behavior ?_-1: depths ini: 0 working: 102 at risk: 221 crush: 225 201567 behavior ?_-1: expected time/tries to surface: 300 20 201567 behavior ?_-1: max time/tries to go up: 300 20 201567 behavior ?_-1: too long: 0, not going up: 0, depth sensor busted:0 201567 behavior ?_-1: abort burn time/tries min: 600 40 201567 behavior ?_-1: abort burn time/tries max: 64800 4320 201567 ERROR behavior ?_-1: we_are_done(): At the surface, return (-2)MS_COMPLETED_ABNORMALLY 201567 behavior ?_-1: we_are_done(): Restoring U_CYCLE_TIME from 15.000000 to 4.000000 201567 restore_sensors().... Restored u_depth_rate_filter_factor from -1 to 4 201567 behavior ?_-1: ABOVE WORKING DEPTH 201567 behavior ?_-1: drop_the_weight = 0 201567 Not recommended, but if in infinite loop, hit Control-C 201568 behavior ?_-1: run_mission(): Mission completed: MS_COMPLETED_ABNORMALLY(-2) Vehicle Name: ru40 Mission Name: 100_n.mi Mission Number: ru40-2023-233-1-47 (0087.0047) post_mission_cleanup(): End of Mission timestamp: Fri Aug 25 00:41:22 2023 timestamp: Fri Aug 25 00:41:26 2023 Mission completed ABNORMALLY, ret = -3 Mission end: grun_mission() 100_n.mi ru40-2023-233-1-47 (0087.0047) SEQUENCE: 100_n.mi ru40-2023-233-1-47 (0087.0047) aborted on try 0 SEQUENCE: Forcing use of critical devices Returning to GliderDos to let iridium report in. Setting U_MAX_TIME_IN_GLIDERDOS(s) to 900 Command error: SEQUENCE: suspended GliderDos A 6 > Vehicle Name: ru40 201574 7 NOTE:GPS fix is getting stale: 821 secs old Vehicle Name: ru40 201574 GliderDos: No keystroke heard for 0 seconds 900 seconds to go before running:SEQUENCE -resume_next GliderDos A 6 >why? ABORT HISTORY: total since reset: 3 ABORT HISTORY: last abort cause: MS_ABORT_BEH_ERROR ABORT HISTORY: last abort details: layered_control(): Behavior surface_3 entered B_ERROR state ABORT HISTORY: last abort time: 2023-08-25T00:40:59 ABORT HISTORY: last abort segment: ru40-2023-233-1-47 (0087.0047) ABORT HISTORY: last abort mission: 100_n.mi BOOT: Last reboot reason was REBOOT_POWER_DOWN - Power Down/Cold Boot Boot number : 226 CORE: Core dump present GliderDos A 6 > GliderDos A 6 >sequence -resume SEQUENCE 100_n.mi(4) Sequencing missions load_mission(): Opening Mission file: 100_n.mi for execution 4 times Validated SENSOR c_science_send_all(bool) value 0.000000 Validated SENSOR c_science_all_on_enabled(bool) value 0.000000 Validated SENSOR u_dbd_sensor_list_xmit_control(enum) value 3.000000 Validated SENSOR u_sci_dbd_sensor_list_xmit_control(enum) value 2.000000 load_mission(): Opening Mission file: lastgasp.mi for execution FOREVER Validated SENSOR u_pitch_motor_test_availability(bool) value 0.000000 1 mission specifiers - sequencing 4 total missions (not counting lastgasp.mi): 100_n.mi(4) lastgasp.mi ABORT HISTORY: total since reset: 3 ABORT HISTORY: last abort cause: MS_ABORT_BEH_ERROR ABORT HISTORY: last abort details: layered_control(): Behavior surface_3 entered B_ERROR state ABORT HISTORY: last abort time: 2023-08-25T00:40:59 ABORT HISTORY: last abort segment: ru40-2023-233-1-47 (0087.0047) ABORT HISTORY: last abort mission: 100_n.mi Vehicle Name: ru40 SEQUENCE: About to run 100_n.mi on try 0 You have 240 seconds to type a control-C to terminate the sequence. The control-P character immediately starts the mission. All other characters are ignored. ^P Heard a control-P, starting the sequence SEQUENCE: Running 100_n.mi on try 0 Starting Mission: 100_n.mi timestamp: Fri Aug 25 00:42:58 2023 load_mission(): Opening Mission file: 100_n.mi Setting SENSOR c_science_send_all(bool) value 0.000000 Setting SENSOR c_science_all_on_enabled(bool) value 0.000000 Setting SENSOR u_dbd_sensor_list_xmit_control(enum) value 3.000000 Setting SENSOR u_sci_dbd_sensor_list_xmit_control(enum) value 2.000000 Vehicle Name: ru40 Curr Time: Fri Aug 25 00:42:58 2023 MT: 201663 DR Location: 3933.154 N -7300.059 E measured 0.139 secs ago GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago GPS Invalid : 3932.952 N -7259.455 E measured 967.314 secs ago GPS Location: 3933.163 N -7300.059 E measured 913.19 secs ago sensor:c_wpt_lat(lat)=3933.476 3453.66 secs ago sensor:c_wpt_lon(lo