Connection Event: Carrier Detect lost.Connection Event: Carrier Detect found.135509 Iridium console active and ready...
Vehicle Name: electa
Curr Time: Wed Jun 7 15:08:47 2023 MT: 135509
DR Location: 3756.306 N -6211.465 E measured 896.641 secs ago
GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago
GPS Invalid : 3756.522 N -6211.746 E measured 951.868 secs ago
GPS Location: 3756.306 N -6211.465 E measured 897.30
not found>yo*.ma<
not found>goto_l*.ma<
not found>sample*.ma<
not found>surfac*.ma<
not found>set_he*.ma<
[dockzr | dockszr] [?][-v N][-nosmartdir][-f rf | irid][-cd dir][-noremove] [-archive]
[-d ] ...
[[-d ... ] ... ]
2 secs ago
sensor:c_climb_target_depth(m)=6 969.023 secs ago
sensor:c_dive_target_depth(m)=345 969.027 secs ago
sensor:c_wpt_lat(lat)=3700 38030.3 secs ago
sensor:c_wpt_lon(lon)=-6250 38030.3 secs ago
sensor:m_avg_climb_rate(m/s)=-0.147573875688717 961.135 secs ago
sensor:m_avg_dive_rate(m/s)=0.190228343945187 2652.32 secs ago
sensor:m_avg_speed(m/s)=0.441647958008007 924.786 secs ago
sensor:m_battery(volts)=15.3335144603368 175.796 secs ago
sensor:m_coulomb_amphr_total(amp-hrs)=68.3923139999977 3.845 secs ago
sensor:m_depth(m)=0 3.708 secs ago
sensor:m_digifin_leakdetect_reading(nodim)=1023 4.074 secs ago
sensor:m_gps_mag_var(rad)=0.284488668075076 897.363 secs ago
sensor:m_iridium_attempt_num(nodim)=1 37.208 secs ago
sensor:m_iridium_call_num(nodim)=1681 0.074 secs ago
sensor:m_iridium_dialed_num(nodim)=2636 12.091 secs ago
sensor:m_leakdetect_voltage(volts)=2.49710012210012 175.688 secs ago
sensor:m_
not found>*.dat<
not found>*.ini<
not found>*.cfg<
[dockzr | dockszr] [?][-v N][-nosmartdir][-f rf | irid][-cd dir][-noremove] [-archive]
[-d ] ...
[[-d ... ] ... ]
leakdetect_voltage_forward(volts)=2.5 175.652 secs ago
sensor:m_leakdetect_voltage_science(volts)=2.5 175.616 secs ago
sensor:m_tot_num_inflections(nodim)=10217 916.815 secs ago
sensor:m_vacuum(inHg)=10.2723621978022 175.794 secs ago
sensor:m_water_vx(m/s)=3.25533555705199E-05 896.741 secs ago
sensor:m_water_vy(m/s)=0.000217812460284 896.744 secs ago
sensor:u_use_current_correction(nodim)=0 1e+308 secs ago
sensor:x_last_wpt_lat(lat)=3742.838 1e+308 secs ago
sensor:x_last_wpt_lon(lon)=-6223.236 1e+308 secs ago
ABORT HISTORY: total since reset: 10
ABORT HISTORY: last abort cause: MS_ABORT_BEH_ERROR
ABORT HISTORY: last abort details: layered_control(): Behavior surface_6 entered B_ERROR state
ABORT HISTORY: last abort time: 2023-06-06T01:21:37
ABORT HISTORY: last abort segment: electa-2023-155-0-15 (0144.0015)
ABORT HISTORY: last abort mission: electa.mi
135509 No login script found for processing.
135596 34 SCI ERROR: science start logging failed
GLD: ERROR resuming logging
--------------------------------
Error from CmdDispatch():Error sending files
135596 ERROR behavior surface_6: S COMMAND FAILED: s -num=5 *.sbd *.tbd *.vem *.azf *.asc
135596 sensor: c_thruster_on = 0 %
Glider electa at surface.
Because:nothing commanded [behavior surface_6 start_when = 1.0]
MissionName:electa.mi MissionNum:electa-2023-156-0-33 (0145.0033)
Vehicle Name: electa
Curr Time: Wed Jun 7 15:10:14 2023 MT: 135597
DR Location: 3756.306 N -6211.465 E measured 983.96 secs ago
GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago
GPS Invalid : 3756.522 N -6211.746 E measured 1039.19 secs ago
GPS Location: 3756.306 N -6211.465 E measured 984.621 secs ago
sensor:c_climb_target_depth(m)=6 1056.34 secs ago
sensor:c_dive_target_depth(m)=345 1056.35 secs ago
sensor:c_wpt_lat(lat)=3700 38117.7 secs ago
sensor:c_wpt_lon(lon)=-6250 38117.7 secs ago
sensor:m_avg_climb_rate(m/s)=-0.147573875688717 1048.45 secs ago
sensor:m_avg_dive_rate(m/s)=0.190228343945187 2739.64 secs ago
sensor:m_avg_speed(m/s)=0.441647958008007 1012.11 secs ago
sensor:m_battery(volts)=15.3335144603368 263.115 secs ago
sensor:m_coulomb_amphr_total(amp-hrs)=68.3998819999977 0.325 secs ago
sensor:m_depth(m)=0 0.188 secs ago
sensor:m_digifin_leakdetect_reading(nodim)=1023 0.555 secs ago
sensor:m_gps_mag_var(rad)=0.284488668075076 984.683 secs ago
sensor:m_iridium_attempt_num(nodim)=1 124.528 secs ago
sensor:m_iridium_call_num(nodim)=1681 87.393 secs ago
sensor:m_iridium_dialed_num(nodim)=2636 99.41 secs ago
sensor:m_leakdetect_voltage(volts)=2.49734432234432 0.171 secs ago
sensor:m_leakdetect_voltage_forward(volts)=2.5 0.136 secs ago
sensor:m_leakdetect_voltage_science(volts)=2.5 0.1 secs ago
sensor:m_tot_num_inflections(nodim)=10217 1004.13 secs ago
sensor:m_vacuum(inHg)=10.2723621978022 263.114 secs ago
sensor:m_water_vx(m/s)=3.25533555705199E-05 984.06 secs ago
sensor:m_water_vy(m/s)=0.000217812460284 984.063 secs ago
sensor:u_use_current_correction(nodim)=0 1e+308 secs ago
sensor:x_last_wpt_lat(lat)=3742.838 1e+308 secs ago
sensor:x_last_wpt_lon(lon)=-6223.236 1e+308 secs ago
devices:(t/m/s) errs: 0/ 0/ 0 warn: 12/ 1/ 0 odd: 720/ 66/ 4
ABORT HISTORY: total since reset: 10
ABORT HISTORY: last abort cause: MS_ABORT_BEH_ERROR
ABORT HISTORY: last abort details: layered_control(): Behavior surface_6 entered B_ERROR state
ABORT HISTORY: last abort time: 2023-06-06T01:21:37
ABORT HISTORY: last abort segment: electa-2023-155-0-15 (0144.0015)
ABORT HISTORY: last abort mission: electa.mi
Hit Control-R to RESUME the mission, i.e. dive!
Hit Control-C to END the mission, i.e. GliderDos
Hit Control-E to extend surface time by 5 minutes.
Hit Control-W to get device warning reports.
Hit Control-F to re-read yo, goto_l, surface, sample, drift_ mafiles.
Hit H <0:1> to Hangup and call back in minutes at 0-primary 1-alternate number.
Hit S [-f={rf}|{irid] [-num=] [-t=] [filespec ...] to send log files
Hit ! to execute
Hit Control-T to consci to science computer when comms ready:
... communications NOT ready for consci.
... because: m_science_clothesline_lag not updated this cycle
Water Velocity Calculations COMPLETE
Waypoint: (3700.0000,-6250.0000) Range: 118596m, Bearing: 225deg, Age: 10:35h:m
^EExtending surface time by 5 minutes
Time until diving is: 156 secs
135597 35 sensor: c_thruster_on = 0 %
I heard a character ('CR'), but not the right one
There were no pending chars in input buffer to drain.
135601 36 sensor: c_thruster_on = 0 %
135605 37 sensor: c_thruster_on = 0 %
^EExtending surface time by 5 minutes
135609 38 sensor: c_thruster_on = 0 %
I heard a character ('CR'), but not the right one
There were no pending chars in input buffer to drain.
135613 39 sensor: c_thruster_on = 0 %
s -num=5 *.sbd *.tbd *.vem *.azf *.asc
--------------------------------
135671 52 SCI:PROGLET house_elf begin() called
135671 SCI: house_elf: Version 1.2
135671 SCI:PROGLET rbrctd begin() called
135671 SCI:PROGLET flbbcd begin() called
135671 SCI: flbbcd: Version 0.0
135671 SCI: flbbcd: Will be sending following data to glider:
135671 SCI: sci_flbbcd_chlor_units(ug/l)
135671 SCI: sci_flbbcd_bb_units(nodim)
135671 SCI: sci_flbbcd_cdom_units(ppb)
135671 SCI: sci_flbbcd_chlor_sig(nodim)
135671 SCI: sci_flbbcd_bb_sig(nodim)
135671 SCI: sci_flbbcd_cdom_sig(nodim)
135671 SCI: sci_flbbcd_chlor_ref(nodim)
135671 SCI: sci_flbbcd_bb_ref(nodim)
135671 SCI: sci_flbbcd_cdom_ref(nodim)
135671 SCI: sci_flbbcd_therm(nodim)
135671 SCI: sci_flbbcd_timestamp(timestamp)
135671 SCI:Bit(0) raise count is now 0.
135671 SCI:Bit(0) raise count is now 0.
135671 SCI:PROGLET bsipar begin() called
135671 SCI: bsipar: Version 0.0
135671 SCI: bsipar: Will be sending following data to glider:
135671 SCI: sci_bsipar_par(ue/m^2sec)
135671 SCI: sci_bsipar_sensor_volts(volts)
135671 SCI: sci_bsipar_temp(degc)
135671 SCI: sci_bsipar_supply_volts(volts)
135671 SCI: sci_bsipar_timestamp(timestamp)
135671 SCI:PROGLET house_elf start() called
135671 SCI: house_elf_run(): 0 error(s) in a row. (5 is fatal)
135671 SCI: house_elf_run(): 0 error(s) since house_elf_begin(). (50 is fatal)
135671 SCI:PROGLET bsipar start() called
135671 SCI: Opening port 3:J3
135671 SCI: 9600 baud, N81, line buf: 35, no input data timeout(secs): 15
135671 SCI:bit_raise: Raising bit(0).
135671 SCI: bsipar_run(): 0 error(s) in a row. (5 is fatal)
135672 SCI: bsipar_run(): 0 error(s) since bsipar_begin(). (50 is fatal)
SCI ERROR: timed out waiting for science to stop loggingGLD: ERROR pausing logging
--------------------------------
Error from CmdDispatch():Error sending files
135744 70 ERROR behavior surface_6: S COMMAND FAILED: s -num=5 *.sbd *.tbd *.vem *.azf *.asc
135744 sensor: c_thruster_on = 0 %
Glider electa at surface.
Because:nothing commanded [behavior surface_6 start_when = 1.0]
MissionName:electa.mi MissionNum:electa-2023-156-0-33 (0145.0033)
Vehicle Name: electa
Curr Time: Wed Jun 7 15:12:43 2023 MT: 135745
DR Location: 3756.306 N -6211.465 E measured 1132.07 secs ago
GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago
GPS Invalid : 3756.522 N -6211.746 E measured 1187.3 secs ago
GPS Location: 3756.306 N -6211.465 E measured 1132.73 secs ago
sensor:c_climb_target_depth(m)=6 1204.46 secs ago
sensor:c_dive_target_depth(m)=345 1204.46 secs ago
sensor:c_wpt_lat(lat)=3700 38265.8 secs ago
sensor:c_wpt_lon(lon)=-6250 38265.8 secs ago
sensor:m_avg_climb_rate(m/s)=-0.147573875688717 1196.57 secs ago
sensor:m_avg_dive_rate(m/s)=0.190228343945187 2887.76 secs ago
sensor:m_avg_speed(m/s)=0.441647958008007 1160.22 secs ago
sensor:m_battery(volts)=15.3294504379905 0.279 secs ago
sensor:m_coulomb_amphr_total(amp-hrs)=68.4123299999977 0.416 secs ago
sensor:m_depth(m)=0 0.188 secs ago
sensor:m_digifin_leakdetect_reading(nodim)=1023 0.646 secs ago
sensor:m_gps_mag_var(rad)=0.284488668075076 1132.8 secs ago
sensor:m_iridium_attempt_num(nodim)=0 128.19 secs ago
sensor:m_iridium_call_num(nodim)=1681 235.507 secs ago
sensor:m_iridium_dialed_num(nodim)=2636 247.524 secs ago
sensor:m_leakdetect_voltage(volts)=2.49716117216117 0.171 secs ago
sensor:m_leakdetect_voltage_forward(volts)=2.5 0.135 secs ago
sensor:m_leakdetect_voltage_science(volts)=2.5 0.099 secs ago
sensor:m_tot_num_inflections(nodim)=10217 1152.25 secs ago
sensor:m_vacuum(inHg)=10.2652037362637 0.278 secs ago
sensor:m_water_vx(m/s)=3.25533555705199E-05 1132.17 secs ago
sensor:m_water_vy(m/s)=0.000217812460284 1132.18 secs ago
sensor:u_use_current_correction(nodim)=0 1e+308 secs ago
sensor:x_last_wpt_lat(lat)=3742.838 1e+308 secs ago
sensor:x_last_wpt_lon(lon)=-6223.236 1e+308 secs ago
devices:(t/m/s) errs: 0/ 0/ 0 warn: 12/ 1/ 0 odd: 720/ 66/ 4
ABORT HISTORY: total since reset: 10
ABORT HISTORY: last abort cause: MS_ABORT_BEH_ERROR
ABORT HISTORY: last abort details: layered_control(): Behavior surface_6 entered B_ERROR state
ABORT HISTORY: last abort time: 2023-06-06T01:21:37
ABORT HISTORY: last abort segment: electa-2023-155-0-15 (0144.0015)
ABORT HISTORY: last abort mission: electa.mi
Hit Control-R to RESUME the mission, i.e. dive!
Hit Control-C to END the mission, i.e. GliderDos
Hit Control-E to extend surface time by 5 minutes.
Hit Control-W to get device warning reports.
Hit Control-F to re-read yo, goto_l, surface, sample, drift_ mafiles.
Hit H <0:1> to Hangup and call back in minutes at 0-primary 1-alternate number.
Hit S [-f={rf}|{irid] [-num=] [-t=] [filespec ...] to send log files
Hit ! to execute
Hit Control-T to consci to science computer when comms ready:
... communications ready for consci.
Water Velocity Calculations COMPLETE
Waypoint: (3700.0000,-6250.0000) Range: 118596m, Bearing: 225deg, Age: 10:37h:m
Time until diving is: 608 secs
135745 71 sensor: c_thruster_on = 0 %
!put c_science_on 0
--------------------------------
135751 72 sensor: c_science_on = 0 bool
--------------------------------
135751 behavior surface_6: ! succeeded:put c_science_on 0
135751 behavior surface_6: SUBSTATE 7 ->7 : After ! command, waiting for control-C to exit/resume
135751 sensor: c_thruster_on = 0 %
!put c_science_on 1
--------------------------------
135755 73 sensor: c_science_on = 1 bool
--------------------------------
135755 behavior surface_6: ! succeeded:put c_science_on 1
135755 behavior surface_6: SUBSTATE 7 ->7 : After ! command, waiting for control-C to exit/resume
135755 sensor: c_thruster_on = 0 %
Glider-Science software version match: 10.080000
Science hardware version is 3.000000
135757 SCI:PROGLET house_elf begin() called
135757 SCI: house_elf: Version 1.2
135757 SCI:PROGLET rbrctd begin() called
135757 SCI:PROGLET flbbcd begin() called
135757 SCI: flbbcd: Version 0.0
135757 SCI: flbbcd: Will be sending following data to glider:
135757 SCI: sci_flbbcd_chlor_units(ug/l)
135757 SCI: sci_flbbcd_bb_units(nodim)
135757 SCI: sci_flbbcd_cdom_units(ppb)
135757 SCI: sci_flbbcd_chlor_sig(nodim)
135757 SCI: sci_flbbcd_bb_sig(nodim)
135757 SCI: sci_flbbcd_cdom_sig(nodim)
135757 SCI: sci_flbbcd_chlor_ref(nodim)
135757 SCI: sci_flbbcd_bb_ref(nodim)
135757 SCI: sci_flbbcd_cdom_ref(nodim)
135757 SCI: sci_flbbcd_therm(nodim)
135757 SCI: sci_flbbcd_timestamp(timestamp)
135757 SCI:Bit(0) raise count is now 0.
135757 SCI:Bit(0) raise count is now 0.
135757 SCI:PROGLET bsipar begin() called
135757 SCI: bsipar: Version 0.0
135757 SCI: bsipar: Will be sending following data to glider:
135757 SCI: sci_bsipar_par(ue/m^2sec)
135757 SCI: sci_bsipar_sensor_volts(volts)
135757 SCI: sci_bsipar_temp(degc)
135757 SCI: sci_bsipar_supply_volts(volts)
135757 SCI: sci_bsipar_timestamp(timestamp)
135757 SCI:PROGLET house_elf start() called
135757 SCI: house_elf_run(): 0 error(s) in a row. (5 is fatal)
135757 SCI: house_elf_run(): 0 error(s) since house_elf_begin(). (50 is fatal)
135757 SCI:PROGLET bsipar start() called
135757 SCI: Opening port 3:J3
135757 SCI: 9600 baud, N81, line buf: 35, no input data timeout(secs): 15
135757 SCI:bit_raise: Raising bit(0).
135757 SCI: bsipar_run(): 0 error(s) in a row. (5 is fatal)
135757 SCI: bsipar_run(): 0 error(s) since bsipar_begin(). (50 is fatal)
^EExtending surface time by 5 minutes
135759 74 sensor: c_thruster_on = 0 %
I heard a character ('CR'), but not the right one
Drained the following 6 pending chars from input buffer:
03 0d 03 0d 03 0d ^C CR ^C CR ^C CR ......
135763 75 sensor: c_thruster_on = 0 %
^W name in ALLCAPS means CRITICAL device (* => SUPERCRITICAL)
[I Installed] [- Not_Installed]
[u In_use] [- Not_In_use] [X Out_of_Service]
name limits stats (#total/#mission/#segment)
os w/s w/m os errors warnings oddities
0 simdrvr -
1 test_driver -
2 ARGOS* I u -1 20 5 0
3 WATCHDOG I u -1 -1 -1 0
4 DEADMAN I u -1 20 5 0
5 CONSOLE* I u -1 20 5 0
6 GPS I u -1 20 5 0 [ 0 0 0] [ 10 1 0] [ 0 0 0]
7 attitude_rev I u 3 20 5 0
8 ocean_pressure I u 3 20 5 0
9 vacuum I u 3 20 5 0
10 battery I u 3 20 5 0
11 air_pump I u 3 20 5 0
12 pitch_motor I u 3 20 5 0 [ 0 0 0] [ 0 0 0] [ 5 0 0]
13 science_super I u 3 20 5 0 [ 0 0 0] [ 2 0 0] [ 40 4 2]
14 digifin I u 3 20 5 0 [ 0 0 0] [ 0 0 0] [ 295 31 2]
15 altimeter I u 3 20 5 0
16 altimeter_232 -
17 IRIDIUM* I u -1 20 5 0 [ 0 0 0] [ 0 0 0] [ 362 30 0]
18 leakdetect I u 3 20 5 0
19 recovery I u 3 20 5 0
20 coulomb I u 3 20 5 0 [ 0 0 0] [ 0 0 0] [ 18 1 0]
21 veh_temp I u 3 20 5 0
22 BUOYANCY_PUMP -
23 DE_PUMP -
24 HD_PUMP I u 3 20 5 0
25 thruster I u 3 20 5 0
devices:(t/m/s) errs: 0/ 0/ 0 warn: 12/ 1/ 0 odd: 720/ 66/ 4
135767 76 sensor: c_thruster_on = 0 %
I heard a character ('CR'), but not the right one
Drained the following 4 pending chars from input buffer:
12 0d 03 0d ^R CR ^C CR ....
135771 77 sensor: c_thruster_on = 0 %
135775 78 sensor: c_thruster_on = 0 %
^C135779 79 behavior surface_6: User Hit a Control-C, terminating the mission
135779 behavior surface_6: STATE Active -> Mission Complete
135779 behavior ?_-1: layered_control(): Mission completed normally
135779 behavior ?_-1: run_mission(): Mission completed: MS_COMPLETED_NORMALLY(-1)
Vehicle Name: electa
Mission Name: electa.mi
Mission Number: electa-2023-156-0-33 (0145.0033)
post_mission_cleanup(): End of Mission
timestamp: Wed Jun 7 15:13:22 2023
timestamp: Wed Jun 7 15:13:26 2023
Mission completed normally
Mission end: grun_mission() electa.mi electa-2023-156-0-33 (0145.0033)
135788 80 sensor: c_thruster_on = 0 %
135788 sensor: c_thruster_on = 0 %
SEQUENCE: electa.mi electa-2023-156-0-33 (0145.0033) completed normally
ABORT HISTORY: total since reset: 10
ABORT HISTORY: last abort cause: MS_ABORT_BEH_ERROR
ABORT HISTORY: last abort details: layered_control(): Behavior surface_6 entered B_ERROR state
ABORT HISTORY: last abort time: 2023-06-06T01:21:37
ABORT HISTORY: last abort segment: electa-2023-155-0-15 (0144.0015)
ABORT HISTORY: last abort mission: electa.mi
Vehicle Name: electa
SEQUENCE: About to run electa.mi on try 1
You have 120 seconds to type a control-C to terminate the sequence.
The control-P character immediately starts the mission.
All other characters are ignored.
^@
I heard a keystroke ('NUL'), but not the right one!
Drained the following 4 pending chars from input buffer:
03 0d 03 0d ^C CR ^C CR ....
ABORT HISTORY: total since reset: 10
ABORT HISTORY: last abort cause: MS_ABORT_BEH_ERROR
ABORT HISTORY: last abort details: layered_control(): Behavior surface_6 entered B_ERROR state
ABORT HISTORY: last abort time: 2023-06-06T01:21:37
ABORT HISTORY: last abort segment: electa-2023-155-0-15 (0144.0015)
ABORT HISTORY: last abort mission: electa.mi
Vehicle Name: electa
SEQUENCE: About to run electa.mi on try 1
You have 120 seconds to type a control-C to terminate the sequence.
The control-P character immediately starts the mission.
All other characters are ignored.
^C
Heard a Control-C, terminating the sequence
GliderDos N -1 >
Vehicle Name: electa
135791 82 NOTE:GPS fix is getting stale: 1179 secs old
Vehicle Name: electa
135791 GliderDos: No keystroke heard for 0 seconds
3600 seconds to go before running:SEQUENCE -resume_next
GliderDos N -1 >
GliderDos N -1 >
GliderDos N -1 >send *.tbd *.sbd
SCIENCE DATA LOGGING: science IS running
CONSCI REQUESTED (using IRIDIUM as console)
ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM
SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM
Normal operation resumes when:
SciDos> QUIT -or-
Lose CD (unplug freewave/hangup iridium) -or-
run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s
135824 94 Neutering the Freewave Console
@HA*Ad
|G%QP AWlAjQP A@Z;A>Ad
uG%P A=,AjP A@11AAd
G%AXP AA$XP A@)AR'Ad
uG%P A=,AdP A@AfAd
ZG%P AjP A@3A"}Ad
uG%SCI: Implicitly limiting total transfer to 1800 secs, representing 180 KB total size
SCI: Enumerating and selecting files
About to send 8 files
Prechecking is not necessary for this invocation
START
**B00000000000000
Starting zModem transfer of 01450032.tbd to/from electa size is 608
Total Bytes sent/received: 608
zModem transfer DONE for file 01450032.tbd
Starting zModem transfer of 01450026.tbd to/from electa size is 759
Total Bytes sent/received: 759
zModem transfer DONE for file 01450026.tbd
Starting zModem transfer of 01450025.tbd to/from electa size is 26158
Total Bytes sent/received: 6144
Total Bytes sent/received: 7168
Total Bytes sent/received: 8192
Total Bytes sent/received: 9216
Total Bytes sent/received: 10240
Total Bytes sent/received: 11264
Total Bytes sent/received: 12288
Total Bytes sent/received: 13312
Total Bytes sent/received: 14336
Total Bytes sent/received: 15360
Total Bytes sent/received: 16384
Total Bytes sent/received: 17408
Total Bytes sent/received: 18432
Total Bytes sent/received: 19456
Total Bytes sent/received: 20480
Total Bytes sent/received: 21504
Total Bytes sent/received: 22528
Total Bytes sent/received: 23552
Total Bytes sent/received: 24576
Total Bytes sent/received: 25600
Total Bytes sent/received: 26158
zModem transfer DONE for file 01450025.tbd
Starting zModem transfer of 01450024.tbd to/from electa size is 747
Total Bytes sent/received: 747
zModem transfer DONE for file 01450024.tbd
Starting zModem transfer of 01450023.tbd to/from electa size is 26773
Total Bytes sent/received: 1024
Total Bytes sent/received: 2048
Total Bytes sent/received: 3072
Total Bytes sent/received: 4096
Total Bytes sent/received: 5120
Total Bytes sent/received: 6144
Total Bytes sent/received: 7168
Total Bytes sent/received: 8192
Total Bytes sent/received: 9216
Total Bytes sent/received: 10240
Total Bytes sent/received: 11264
Total Bytes sent/received: 12288
Total Bytes sent/received: 13312
Total Bytes sent/received: 14336
Total Bytes sent/received: 15360
Total Bytes sent/received: 16384
Total Bytes sent/received: 17408
Total Bytes sent/received: 18432
Total Bytes sent/received: 19456
Total Bytes sent/received: 20480
Total Bytes sent/received: 21504
Total Bytes sent/received: 22528
Total Bytes sent/received: 23552
Total Bytes sent/received: 24576
Total Bytes sent/received: 25600
Total Bytes sent/received: 26624
Total Bytes sent/received: 26773
zModem transfer DONE for file 01450023.tbd
Starting zModem transfer of 01450022.tbd to/from electa size is 963
Total Bytes sent/received: 963
zModem transfer DONE for file 01450022.tbd
Starting zModem transfer of 01440014.tbd to/from electa size is 30682
Total Bytes sent/received: 19456
Total Bytes sent/received: 20480
Total Bytes sent/received: 21504
Total Bytes sent/received: 22528
Total Bytes sent/received: 23552
Total Bytes sent/received: 24576
Total Bytes sent/received: 25600
Total Bytes sent/received: 26624
Total Bytes sent/received: 27648
Total Bytes sent/received: 28672
Total Bytes sent/received: 29696
Total Bytes sent/received: 30682
zModem transfer DONE for file 01440014.tbd
Starting zModem transfer of 01440013.tbd to/from electa size is 771
Total Bytes sent/received: 771
zModem transfer DONE for file 01440013.tbd
....*.*.^X.B
SCI: Sent 8 file(s):
01450032.tbd 01450026.tbd 01450025.tbd 01450024.tbd 01450023.tbd
01450022.tbd 01440014.tbd 01440013.tbd
SCI: SUCCESS
136247 95 Freewave console restored
REVERTING FROM SCIENCE COMMAND MODE
SCIENCE COMMAND MODE TERMINATED because:
Science Program QUIT (cts lowered)
136250 GLD: Enumerating and selecting files
About to send 1 files
Prechecking is not necessary for this invocation
selected IRIDIUM
136251 save_and_change_sensors()....
Changed u_use_ctd_depth_for_flying from 0 to 0
Changed c_science_on from 1 to 0
136251 save_and_change_sensors()....
Changed c_science_printout from 0 to 0
Waiting for motors idle
START
**B00000
Starting zModem transfer of 01450032.sbd to/from electa size is 744
Total Bytes sent/received: 744
zModem transfer DONE for file 01450032.sbd
136266 restore_sensors()....
Restored u_use_ctd_depth_for_flying from 0 to 0
Restored c_science_on from 0 to 1
136266 restore_sensors()....
136266 restore_sensors()....
Restored c_science_printout from 0 to 0
SHUFFLING FILES .
136266 GLD: Sent 1 file(s):
01450032.sbd
GLD: SUCCESS
Glider-Science software version match: 10.080000
Science hardware version is 3.000000
136268 96 SCI:PROGLET house_elf begin() called
136268 SCI: house_elf: Version 1.2
136268 SCI:PROGLET rbrctd begin() called
136268 SCI:PROGLET flbbcd begin() called
136268 SCI: flbbcd: Version 0.0
136268 SCI: flbbcd: Will be sending following data to glider:
136268 SCI: sci_flbbcd_chlor_units(ug/l)
136268 SCI: sci_flbbcd_bb_units(nodim)
136268 SCI: sci_flbbcd_cdom_units(ppb)
136268 SCI: sci_flbbcd_chlor_sig(nodim)
136268 SCI: sci_flbbcd_bb_sig(nodim)
136268 SCI: sci_flbbcd_cdom_sig(nodim)
136268 SCI: sci_flbbcd_chlor_ref(nodim)
136268 SCI: sci_flbbcd_bb_ref(nodim)
136268 SCI: sci_flbbcd_cdom_ref(nodim)
136268 SCI: sci_flbbcd_therm(nodim)
136268 SCI: sci_flbbcd_timestamp(timestamp)
136268 SCI:Bit(0) raise count is now 0.
136268 SCI:Bit(0) raise count is now 0.
136268 SCI:PROGLET bsipar begin() called
136268 SCI: bsipar: Version 0.0
136268 SCI: bsipar: Will be sending following data to glider:
136268 SCI: sci_bsipar_par(ue/m^2sec)
136268 SCI: sci_bsipar_sensor_volts(volts)
136268 SCI: sci_bsipar_temp(degc)
136268 SCI: sci_bsipar_supply_volts(volts)
136268 SCI: sci_bsipar_timestamp(timestamp)
136269 SCI:PROGLET house_elf start() called
136269 SCI: house_elf_run(): 0 error(s) in a row. (5 is fatal)
136269 SCI: house_elf_run(): 0 error(s) since house_elf_begin(). (50 is fatal)
GliderDos N -1 >
Vehicle Name: electa
136270 NOTE:GPS fix is getting stale: 1658 secs old
GliderDos N -1 >
GliderDos N -1 >
GliderDos N -1 >
GliderDos N -1 >
GliderDos N -1 >callback 2
I am going to hangup the Iridium!
I will call you back in 2 minutes
at the primary number ( 88160000592 )
GliderDos N -1 >136564 68 disabling Iridium console...