Connection Event: Carrier Detect found. 36618 Iridium console active and ready... Vehicle Name: bios_minnie Curr Time: Sat Mar 26 10:43:05 2022 MT: 36618 DR Location: 3208.064 N -6429.905 E measured 507.87 secs ago GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago GPS Invalid : 3209.594 N -6429.816 E measured 567.294 secs ago GPS Location: 3208.064 N -6429.905 E measured 510.291 secs ago sensor:c_thruster_surface_depth(m)=0 424.78 secs ago sensor:c_wpt_lat(lat)=3218 1335.72 secs ago sensor:c_wpt_lon(lon)=-6430 1335.77 secs ago sensor:m_battery(volts)=14.9314780127752 6.514 secs ago sensor:m_coulomb_amphr(amp-hrs)=8.70556259155273 6.692 secs ago sensor:m_coulomb_amphr_total(amp-hrs)=9.4394365963211 6.706 secs ago sensor:m_depth(m)=0 6.581 secs ago sensor:m_digifin_leakdetect_reading(nodim)=1022 0.523 secs ago sensor:m_gps_mag_var(rad)=0.260054058547155 510.735 secs ago sensor:m_iridium_attempt_num(nodim)=1 43.473 secs ago sensor:m_iridium_call_num(nodim)=3270 0.592 secs ago sensor:m_iridium_dialed_num(nodim)=4055 15.11 secs ago sensor:m_leakdetect_voltage(volts)=2.47844932844933 47.34 secs ago sensor:m_leakdetect_voltage_forward(volts)=2.48192918192918 47.353 secs ago sensor:m_tot_num_inflections(nodim)=7861 646.79 secs ago sensor:m_vacuum(inHg)=9.37705433455433 6.979 secs ago sensor:m_water_vx(m/s)=-0.00258434807500901 418.349 secs ago sensor:m_water_vy(m/s)=0.017883709168192 418.382 secs ago sensor:u_alt_min_depth(m)=2 1e+308 secs ago sensor:u_min_water_depth(m)=0 1e+308 secs ago sensor:u_use_current_correction(nodim)=1 1e+308 secs ago sensor:x_fin_deadband(rad)=0.04 36619.4 secs ago sensor:x_last_wpt_lat(lat)=3208 1336.76 secs ago sensor:x_last_wpt_lon(lon)=-6430 1336.8 secs ago ABORT HISTORY: total since reset: 1 ABORT HISTORY: last abort cause: MS_ABORT_OVERDEPTH ABORT HISTORY: last abort details: ABORT HISTORY: last abort time: 2022-03-24T12:55:17 ABORT HISTORY: last abort segment: bios_minnie-2022-082-1-0 (0230.0000) ABORT HISTORY: last abort mission: OD5.MI 36619 No login script found for processing. GliderDos N -1 >consci 36672 82 Choosing console...No freewave carrier, using IRIDIUM CONSCI REQUESTED (using IRIDIUM as console) GliderDos N -1 >ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s 36673 84 Neutering the Freewave Console sci_shell Version 8.2 Under Ice, In-situ Compass Cal, JASCO Observer Added WetLabs FLBBBBSLC(flbbbbV1 and flbbbbV2) and JASCO obsvr proglets SciDos>quit Returning from SciDos 36698 90 Freewave console restored REVERTING FROM SCIENCE COMMAND MODE SCIENCE COMMAND MODE TERMINATED because: Science Program QUIT (cts lowered) GliderDos N -1 >cd mafiles error code -1 GliderDos N -1 >consci 36773 7 Choosing console...No freewave carrier, using IRIDIUM CONSCI REQUESTED (using IRIDIUM as console) GliderDos N -1 >ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s 36774 9 Neutering the Freewave Console sci_shell Version 8.2 Under Ice, In-situ Compass Cal, JASCO Observer Added WetLabs FLBBBBSLC(flbbbbV1 and flbbbbV2) and JASCO obsvr proglets SciDos>cd c:\config \CONFIG SciDos>type suna.ini # This is the SUNA proglet initialization file # The SUNA needs to be configured as follows: # 38400 as the baud rate # Operation Mode must be set to polled: 'opermode polled' # Skip Sleep at Startup must be on: 'skpsleep on' # Polled Timeout must be set to 0: 'polltout 0' # Super Caps must be disabled: 'set suprcaps Missing' # ****The super cap configuration is a factory setting, contact Satlantic # for the procedure (factory password required).**** # # SUNA.INI configures all proglet specific parameters, # all parameters take the format: # : # are whole numbers (0...n) # # # 2016-06-23 mbrissette@teledyne.com Initial: Mantis 2353, SUNA polled mode # 2016-09-16 mbrissette@teledyme.com Mantis 3278, Sensor 'f_suna_firmware_cfg' # is no longer valid, use parameter 'FIRMWARE_VERSION' in 'suna.ini'. # 2017-12-19 mbrissette@teledyne.com Mantis 4124: Increased the default for # MAX_ALL_FRAMES_WAIT_SEC from 5 to 10 seconds # 2021-01-14 ruth.curry@bios.edu set Light Frames/Sample to 3 # The firmware version of the SUNA # 1 - SUNA Firmware version 1 # 2 - SUNA Firmware version 2 FIRMWARE_VERSION: 2 # Store 'dark' frames to the local glider file '*.bin' # 0 - Do not store 'dark' frames to '*.bin' file # 1 - Store 'dark' frames to '*.bin' file STORE_DARK_FRAMES: 1 # The number of 'light' frames per sample # n - number of 'light' frames per sample LIGHT_FRAMES_PER_SAMPLE: 3 # The maximum number of seconds the proglet will wait for sample frames # n - number of secs the proglet will wait for SUNA to process # 1xDARK FRAME + LIGHT_FRAMES_PER_SAMPLE MAX_ALL_FRAMES_WAIT_SEC: 10 ############################################################################### # The following parameters should only be changed when directed by Teledyne # ############################################################################### # The Diag Level parameter is used to capture diagnostic information. When the # diag level is > 1 debug output is generated to the science terminal and the # the science NLG file. # 0 - DIAG_LEVEL_NORMAL, normal mode of operation, only errors reported. # 1 - DIAG_LEVEL_STATE_TRACE, proglet state trace info. # 2 - DIAG_LEVEL_MSG_TRACE, DIAG_LEVEL_STATE_TRACE + SUNA message tracing. # 3 - DIAG_LEVEL_FRAME_TRACE, DIAG_LEVEL_MSG_TRACE + SUNA frame tracing. DIAG_LEVEL: 0 # The Number of Errors attribute determines how many errors will be detected # before a failing status is returned and an error is generated. # n - Number of acceptable errors. NUM_ERRORS: 10 # The Power Up Wait Seconds attribute determines how long the proglet waits # before communicating with the the SUNA after enabling power. # n - seconds to wait before accessing the SUNA after enabling power. MAX_POWER_UP_WAIT_SEC: 10 # The amount of time, in seconds, that it takes to bring the SUNA out of sleep. # n - seconds to bring the SUNA out of sleep. "Any activity on RS-232 or # USB brings the sensor within three seconds to the command interface." SLEEP_WAKE_SEC: 3 # The maximum amount of time, in seconds, to wait for a command prompt. # n - maximum seconds to wait for a command prompt after sending the SUNA # input data. MAX_CMD_PROMPT_WAIT_SEC: 5 # The Power Down Pause Seconds attribute determines how long the proglet waits # after receiving the 'SUNA>' prompt, prior to removing power from the SUNA. # n - seconds to pause, prior to removing power from the SUNA. POWER_DOWN_PAUSE_SEC: 3 # The Power Down Wait Seconds attribute determines how long the proglet waits # after removing power from the SUNA. This wait is tied to the SuperCaps. # n - seconds to wait after removing power from the SUNA. POWER_DOWN_WAIT_SEC: 10 SciDos>dir Volume in drive C is PB1230 Volume Serial Number is CC18-37E7 Directory of C:\CONFIG\ . 03-15-22 3:56p .. 03-15-22 3:55p AD2CP.CFG 845 09-19-18 7:46p AD2CP.INI 4,858 09-19-18 7:46p APPCMD.DAT 13 09-19-18 7:46p AZFP.CFG 1,502 09-19-18 7:46p AZFP.INI 2,080 09-19-18 7:46p DELLOG.DAT 547 09-19-18 7:46p DVL.INI 1,335 09-19-18 7:46p ECHO853.INI 3,980 09-19-18 7:46p HIGHDENS.DAT 597 09-19-18 7:46p LISST.CFG 835 09-19-18 7:46p LISST.INI 1,978 09-19-18 7:46p LMS.INI 1,592 09-19-18 7:46p NBDLIST.DAT 4,102 03-15-22 3:42p OBSVR.INI 2,336 09-19-18 7:46p PROGLETS.DAT 7,470 03-15-22 7:40p SBE41NPH.INI 1,867 09-19-18 7:46p SUNA.INI 3,801 03-26-22 12:14a TBDLIST.DAT 2,453 03-15-22 3:39p URIDER.CFG 1,663 09-19-18 7:46p URIDER.INI 3,013 09-19-18 7:46p VR2C_CFG.0 1,224 09-19-18 7:46p VR2C_CFG.1 1,235 09-19-18 7:46p ZMEXT.DAT 2,114 09-19-18 7:46p 23 file(s) 51,440 bytes 2 dir(s) 2,069,594,112 bytes free SciDos>szr Bad command or file name SciDos>quit Returning from SciDos 37051 73 Freewave console restored REVERTING FROM SCIENCE COMMAND MODE SCIENCE COMMAND MODE TERMINATED because: Science Program QUIT (cts lowered) GliderDos N -1 >szr suna.ini SCIENCE DATA LOGGING: science IS running CONSCI REQUESTED (using IRIDIUM as console) ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s 37070 79 Neutering the Freewave Console START Unused arguments on the command line: SUNA.INI 37071 Freewave console restored REVERTING FROM SCIENCE COMMAND MODE SCIENCE COMMAND MODE TERMINATED because: Science Program QUIT (cts lowered) GliderDos N -1 > Vehicle Name: bios_minnie 37073 NOTE:GPS fix is getting stale: 965 secs old GliderDos N -1 >consci 37087 82 Choosing console...No freewave carrier, using IRIDIUM CONSCI REQUESTED (using IRIDIUM as console) GliderDos N -1 >ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s 37088 84 Neutering the Freewave Console sci_shell Version 8.2 Under Ice, In-situ Compass Cal, JASCO Observer Added WetLabs FLBBBBSLC(flbbbbV1 and flbbbbV2) and JASCO obsvr proglets SciDos>cd c:\config \CONFIG SciDos>type suna.ini # This is the SUNA proglet initialization file # The SUNA needs to be configured as follows: # 38400 as the baud rate # Operation Mode must be set to polled: 'opermode polled' # Skip Sleep at Startup must be on: 'skpsleep on' # Polled Timeout must be set to 0: 'polltout 0' # Super Caps must be disabled: 'set suprcaps Missing' # ****The super cap configuration is a factory setting, contact Satlantic # for the procedure (factory password required).**** # # SUNA.INI configures all proglet specific parameters, # all parameters take the format: # : # are whole numbers (0...n) # # # 2016-06-23 mbrissette@teledyne.com Initial: Mantis 2353, SUNA polled mode # 2016-09-16 mbrissette@teledyme.com Mantis 3278, Sensor 'f_suna_firmware_cfg' # is no longer valid, use parameter 'FIRMWARE_VERSION' in 'suna.ini'. # 2017-12-19 mbrissette@teledyne.com Mantis 4124: Increased the default for # MAX_ALL_FRAMES_WAIT_SEC from 5 to 10 seconds # 2021-01-14 ruth.curry@bios.edu set Light Frames/Sample to 3 # The firmware version of the SUNA # 1 - SUNA Firmware version 1 # 2 - SUNA Firmware version 2 FIRMWARE_VERSION: 2 # Store 'dark' frames to the local glider file '*.bin' # 0 - Do not store 'dark' frames to '*.bin' file # 1 - Store 'dark' frames to '*.bin' file STORE_DARK_FRAMES: 1 # The number of 'light' frames per sample # n - number of 'light' frames per sample LIGHT_FRAMES_PER_SAMPLE: 3 # The maximum number of seconds the proglet will wait for sample frames # n - number of secs the proglet will wait for SUNA to process # 1xDARK FRAME + LIGHT_FRAMES_PER_SAMPLE MAX_ALL_FRAMES_WAIT_SEC: 10 ############################################################################### # The following parameters should only be changed when directed by Teledyne # ############################################################################### # The Diag Level parameter is used to capture diagnostic information. When the # diag level is > 1 debug output is generated to the science terminal and the # the science NLG file. # 0 - DIAG_LEVEL_NORMAL, normal mode of operation, only errors reported. # 1 - DIAG_LEVEL_STATE_TRACE, proglet state trace info. # 2 - DIAG_LEVEL_MSG_TRACE, DIAG_LEVEL_STATE_TRACE + SUNA message tracing. # 3 - DIAG_LEVEL_FRAME_TRACE, DIAG_LEVEL_MSG_TRACE + SUNA frame tracing. DIAG_LEVEL: 0 # The Number of Errors attribute determines how many errors will be detected # before a failing status is returned and an error is generated. # n - Number of acceptable errors. NUM_ERRORS: 10 # The Power Up Wait Seconds attribute determines how long the proglet waits # before communicating with the the SUNA after enabling power. # n - seconds to wait before accessing the SUNA after enabling power. MAX_POWER_UP_WAIT_SEC: 10 # The amount of time, in seconds, that it takes to bring the SUNA out of sleep. # n - seconds to bring the SUNA out of sleep. "Any activity on RS-232 or # USB brings the sensor within three seconds to the command interface." SLEEP_WAKE_SEC: 3 # The maximum amount of time, in seconds, to wait for a command prompt. # n - maximum seconds to wait for a command prompt after sending the SUNA # input data. MAX_CMD_PROMPT_WAIT_SEC: 5 # The Power Down Pause Seconds attribute determines how long the proglet waits # after receiving the 'SUNA>' prompt, prior to removing power from the SUNA. # n - seconds to pause, prior to removing power from the SUNA. POWER_DOWN_PAUSE_SEC: 3 # The Power Down Wait Seconds attribute determines how long the proglet waits # after removing power from the SUNA. This wait is tied to the SuperCaps. # n - seconds to wait after removing power from the SUNA. POWER_DOWN_WAIT_SEC: 10 SciDos>quit Returning from SciDos 37231 18 Freewave console restored REVERTING FROM SCIENCE COMMAND MODE SCIENCE COMMAND MODE TERMINATED because: Science Program QUIT (cts lowered) GliderDos N -1 > 37377 51 DRIVER_ODDITY:digifin:9511:xxx_ctrl() ran too long Vehicle Name: bios_minnie 37390 54 NOTE:GPS fix is getting stale: 1282 secs old GliderDos N -1 >szr SCIENCE DATA LOGGING: science IS running CONSCI REQUESTED (using IRIDIUM as console) ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s 37417 60 Neutering the Freewave Console START **B01000800275775 Starting zModem transfer of suna.ini to/from bios_minnie size is 3699 Total Bytes sent/received: 1024 Total Bytes sent/received: 2048 Total Bytes sent/received: 3072 Total Bytes sent/received: 3699 zModem transfer DONE for file suna.ini sending >suna.ini< Sent archiving >/var/opt/sfmc-dockserver/stations/bios/gliders/bios_minnie/to-science/suna.ini< as >/var/opt/sfmc-dockserver/stations/bios/gliders/bios_minnie/archive/20220326T105715_suna.ini< Successful deleting >/var/opt/sfmc-dockserver/stations/bios/gliders/bios_minnie/to-science/suna.ini< Successful Done! 37461 71 Freewave console restored REVERTING FROM SCIENCE COMMAND MODE SCIENCE COMMAND MODE TERMINATED because: Science Program QUIT (cts lowered) GliderDos N -1 >consci 37488 78 Choosing console...No freewave carrier, using IRIDIUM CONSCI REQUESTED (using IRIDIUM as console) GliderDos N -1 >ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s 37489 79 Neutering the Freewave Console sci_shell Version 8.2 Under Ice, In-situ Compass Cal, JASCO Observer Added WetLabs FLBBBBSLC(flbbbbV1 and flbbbbV2) and JASCO obsvr proglets SciDos>cd config error code -1 SciDos>cd c:\config \CONFIG SciDos>type suna.ini # This is the SUNA proglet initialization file # The SUNA needs to be configured as follows: # 38400 as the baud rate # Operation Mode must be set to polled: 'opermode polled' # Skip Sleep at Startup must be on: 'skpsleep on' # Polled Timeout must be set to 0: 'polltout 0' # Super Caps must be disabled: 'set suprcaps Missing' # ****The super cap configuration is a factory setting, contact Satlantic # for the procedure (factory password required).**** # # SUNA.INI configures all proglet specific parameters, # all parameters take the format: # : # are whole numbers (0...n) # # # 2016-06-23 mbrissette@teledyne.com Initial: Mantis 2353, SUNA polled mode # 2016-09-16 mbrissette@teledyme.com Mantis 3278, Sensor 'f_suna_firmware_cfg' # is no longer valid, use parameter 'FIRMWARE_VERSION' in 'suna.ini'. # The firmware version of the SUNA # 1 - SUNA Firmware version 1 # 2 - SUNA Firmware version 2 FIRMWARE_VERSION: 2 # Store 'dark' frames to the local glider file '*.bin' # 0 - Do not store 'dark' frames to '*.bin' file # 1 - Store 'dark' frames to '*.bin' file STORE_DARK_FRAMES: 1 # The number of 'light' frames per sample # n - number of 'light' frames per sample LIGHT_FRAMES_PER_SAMPLE: 3 # The maximum number of seconds the proglet will wait for sample frames # n - number of secs the proglet will wait for SUNA to process # 1xDARK FRAME + LIGHT_FRAMES_PER_SAMPLE MAX_ALL_FRAMES_WAIT_SEC: 20 ############################################################################### # The following parameters should only be changed when directed by Teledyne # ############################################################################### # The Diag Level parameter is used to capture diagnostic information. When the # diag level is > 1 debug output is generated to the science terminal and the # the science NLG file. # 0 - DIAG_LEVEL_NORMAL, normal mode of operation, only errors reported. # 1 - DIAG_LEVEL_STATE_TRACE, proglet state trace info. # 2 - DIAG_LEVEL_MSG_TRACE, DIAG_LEVEL_STATE_TRACE + SUNA message tracing. # 3 - DIAG_LEVEL_FRAME_TRACE, DIAG_LEVEL_MSG_TRACE + SUNA frame tracing. DIAG_LEVEL: 0 # The Number of Errors attribute determines how many errors will be detected # before a failing status is returned and an error is generated. # n - Number of acceptable errors. NUM_ERRORS: 100 # The Power Up Wait Seconds attribute determines how long the proglet waits # before communicating with the the SUNA after enabling power. # n - seconds to wait before accessing the SUNA after enabling power. MAX_POWER_UP_WAIT_SEC: 10 # The amount of time, in seconds, that it takes to bring the SUNA out of sleep. # n - seconds to bring the SUNA out of sleep. "Any activity on RS-232 or # USB brings the sensor within three seconds to the command interface." SLEEP_WAKE_SEC: 3 # The maximum amount of time, in seconds, to wait for a command prompt. # n - maximum seconds to wait for a command prompt after sending the SUNA # input data. MAX_CMD_PROMPT_WAIT_SEC: 5 # The Power Down Pause Seconds attribute determines how long the proglet waits # after receiving the 'SUNA>' prompt, prior to removing power from the SUNA. # n - seconds to pause, prior to removing power from the SUNA. POWER_DOWN_PAUSE_SEC: 3 # The Power Down Wait Seconds attribute determines how long the proglet waits # after removing power from the SUNA. This wait is tied to the SuperCaps. # n - seconds to wait after removing power from the SUNA. POWER_DOWN_WAIT_SEC: 10 SciDos>u4stalk 4 38400 0 U4STALK: Program Version 1.1 Version 8.2 Under Ice, In-situ Compass Cal, JASCO Observer Using uart port 4 at 38400 baud Raising a total of 1 bit(s): 0 ---------------------------------------------------------------------- Opening port 4:SBMB:J4 38400 baud, N81, line buf: 0, no input data timeout(secs): disabled in queue size: 204800, out queue size: 2048 sci_uart_drain_input(4): sci_uart_drain_input:Drained 0 chars bit_shared_open(): bit(0) is already open. Bit(0) use count is now 2. bit_shared_raise(): Raising bit(0). All the setup is done. Beginning emulation.... To exit this program: Drop Carrier Detect for 3 seconds (i.e. unpower freewave) --or--Type Ctrl-C and hit NO keys for 1 secs. ---------------------------------------------------------------------- 8[2022/03/26 10:59:11] vMainNitrateTask()::INFO-Start SUNA SN:1020 V2, FW 2.5.1 [2022/03/26 10:59:11] vMainNitrateTask()::INFO-Charge power loss protector. [2022/03/26 10:59:13] vMainNitrateTask()::INFO-Reset from power cycling, sv default wakeup CMD?$ SUNA> selftest System time , 2022-03-26T10:59:32Z Extrn Disk Size; Free , 3954802688; 3945791488 Intrn Disk Size; Free , 2043904; 1678336 Fiberlite Odometer , 0072:37:11 Temperatures Hs Sp Lm , 21.1 20.8 21.2 Humidity , 0.0 Electrical Mn Bd Pr C , 14.9 11.8 5.0 15.6 Lamp Power , 7293 mW Spec Dark av sd mi ma , 790 (+/- 10) [ 761: 819] Spec Lght av sd mi ma , 19802 (+/- 11184) [ 789:45889] Spec Integration Time , 275 ms $Ok SUNA> Heard exit char, Leaving emulation_loop() sci_uart_close(4): Closing SBMB:J4 Restoring bit[s] to initial state. Lowering bit: 0 Bit(0) raise count is now 0. bit_shared_close(): bit(0) is still in use. Bit(0) use count is now 1. return 0; from main() ---------------------------------------------------------------------- SciDos>quit Returning from SciDos 37631 12 Freewave console restored REVERTING FROM SCIENCE COMMAND MODE SCIENCE COMMAND MODE TERMINATED because: Science Program QUIT (cts lowered) GliderDos N -1 >send *.tbd *.sbd SCIENCE DATA LOGGING: science IS running CONSCI REQUESTED (using IRIDIUM as console) ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s 37649 17 Neutering the Freewave Console SCI: Implicitly limiting total transfer to 1800 secs, representing 180 KB total size SCI: Enumerating and selecting files SCI: About to send 2 files Prechecking is not necessary for this invocation START **B00000000000000 Starting zModem transfer of 02330004.tbd to/from bios_minnie size is 7516 Total Bytes sent/received: 1024 Total Bytes sent/received: 2048 Total Bytes sent/received: 3072 Total Bytes sent/received: 4096 Total Bytes sent/received: 5120 Total Bytes sent/received: 6144 Total Bytes sent/received: 7168 Total Bytes sent/received: 7516 zModem transfer DONE for file 02330004.tbd Starting zModem transfer of 02330003.tbd to/from bios_minnie size is 3764 Total Bytes sent/received: 1024 Total Bytes sent/received: 2048 Total Bytes sent/received: 3072 Total Bytes sent/received: 3764 zModem transfer DONE for file 02330003.tbd SHUFFLING FILES.. SCI: Sent 2 file(s): c:\logs\02330004.TBD c:\logs\02330003.TBD SCI: SUCCESS 37746 39 Freewave console restored REVERTING FROM SCIENCE COMMAND MODE SCIENCE COMMAND MODE TERMINATED because: Science Program QUIT (cts lowered) GLD: Enumerating and selecting files GLD: About to send 2 files Prechecking is not necessary for this invocation 37747 save_and_change_sensors().... Changed u_use_ctd_depth_for_flying from 0 to 0 Changed c_science_on from 1 to 0 37747 save_and_change_sensors().... Changed c_science_printout from 0 to 0 Waiting for motors idle START **B00000 Starting zModem transfer of 02330004.sbd to/from bios_minnie size is 6953 Total Bytes sent/received: 1024 Total Bytes sent/received: 2048 Total Bytes sent/received: 3072 Total Bytes sent/received: 4096 Total Bytes sent/received: 5120 Total Bytes sent/received: 6144 Total Bytes sent/received: 6953 zModem transfer DONE for file 02330004.sbd Starting zModem transfer of 02330003.sbd to/from bios_minnie size is 795 Total Bytes sent/received: 795 zModem transfer DONE for file 02330003.sbd 37825 restore_sensors().... Restored u_use_ctd_depth_for_flying from 0 to 0 Restored c_science_on from 0 to 1 37825 restore_sensors().... 37825 restore_sensors().... Restored c_science_printout from 0 to 0 SHUFFLING FILES.. GLD: Sent 2 file(s): c:\logs\02330004.SBD c:\logs\02330003.SBD GLD: SUCCESS Glider-Science software version match: 8.200000 Science hardware version is 2.000000 37896 56 SCI:PROGLET house_elf begin() called 37896 SCI: house_elf: Version 1.2 37897 56 SCI:PROGLET ctd41cp begin() called 37898 SCI: ctd41cp: Version 0.2 37898 SCI: ctd41cp: Will be sending the following data to glider: 37898 SCI: sci_water_cond(s/m) 37898 SCI: sci_water_temp(degc) 37898 SCI: sci_water_pressure(bar) 37898 SCI: sci_ctd41cp_timestamp(timestamp) 37898 SCI:PROGLET flbbcd begin() called 37898 SCI: flbbcd: Version 0.0 37898 SCI: flbbcd: Will be sending following data to glider: 37898 SCI: sci_flbbcd_chlor_units(ug/l) 37898 SCI: sci_flbbcd_bb_units(nodim) 37898 SCI: sci_flbbcd_cdom_units(ppb) 37899 SCI: sci_flbbcd_chlor_sig(nodim) 37899 SCI: sci_flbbcd_bb_sig(nodim) 37899 SCI: sci_flbbcd_cdom_sig(nodim) 37899 SCI: sci_flbbcd_chlor_ref(nodim) 37899 SCI: sci_flbbcd_bb_ref(nodim) 37899 SCI: sci_flbbcd_cdom_ref(nodim) 37899 SCI: sci_flbbcd_therm(nodim) 37899 SCI: sci_flbbcd_timestamp(timestamp) 37899 SCI: Opening Bit(0) for output 37899 SCI:Bit(0) use count is now 1. 37899 SCI:Bit(0) raise count is now 0. 37899 SCI:Bit(0) raise count is now 0. 37900 SCI:PROGLET suna begin() called 37900 SCI:PROGLET oxy4 begin() called 37900 SCI: oxy4: Version 0.0 37900 SCI: oxy4: Will be sending following data to glider: 37900 SCI: sci_oxy4_oxygen(um) 37900 SCI: sci_oxy4_saturation(%) 37900 SCI: sci_oxy4_temp(degc) 37900 SCI: sci_oxy4_calphase(deg) 37900 SCI: sci_oxy4_tcphase(deg) 37900 SCI: sci_oxy4_c1rph(deg) 37900 SCI: sci_oxy4_c2rph(deg) 37900 SCI: sci_oxy4_c1amp(mv) 37900 SCI: sci_oxy4_c2amp(mv) 37900 SCI: sci_oxy4_rawtemp(mv) 37901 57 SCI: sci_oxy4_timestamp(timestamp) 37901 SCI: Opening Bit(2) for output 37901 SCI:Bit(2) use count is now 1. 37902 SCI:Bit(2) raise count is now 0. 37902 SCI:Bit(2) raise count is now 0. 37904 SCI:PROGLET house_elf start() called 37904 SCI: house_elf_run(): 0 error(s) in a row. (5 is fatal) 37904 SCI: house_elf_run(): 0 error(s) since house_elf_begin(). (50 is fatal) 37904 SCI:PROGLET suna start() called 37904 SCI: suna_run(): 0 error(s) in a row. (5 is fatal) 37904 SCI: suna_run(): 0 error(s) since suna_begin(). (50 is fatal) GliderDos N -1 > Vehicle Name: bios_minnie 37905 NOTE:GPS fix is getting stale: 1797 secs old GliderDos N -1 >callback 3 I am going to hangup the Iridium! I will call you back in 3 minutes at the primary number ( 881600005280 ) GliderDos N -1 > 37932 65 disabling Iridium console...