Connection Event: Carrier Detect found.209.32 Iridium console active and ready... Vehicle Name: ru34 Curr Time: Mon Feb 8 20:47:56 2021 MT: 209 DR Location: 3921.721 N -7412.527 E measured 0.519 secs ago GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago GPS Invalid : 3930.528 N -7419.522 E measured 1e+308 secs ago GPS Location: 3921.720 N -7412.530 E measured 116.898 secs ago sensor:c_wpt_lat(lat)=0 1e+308 secs ago sensor:c_wpt_lon(lon)=0 1e+308 secs ago sensor:m_battery(volts)=16.3251940720039 3.76 secs ago sensor:m_coulomb_amphr(amp-hrs)=0.328744 3.857 secs ago sensor:m_coulomb_amphr_total(amp-hrs)=0.401244 3.861 secs ago sensor:m_depth(m)=0 3.672 secs ago sensor:m_digifin_leakdetect_reading(nodim)=1023 4.09 secs ago sensor:m_gps_mag_var(rad)=0.218166156499291 116.945 secs ago sensor:m_iridium_attempt_num(nodim)=2 44.457 secs ago sensor:m_iridium_call_num(nodim)=1649 0.058 secs ago sensor:m_iridium_dialed_num(nodim)=2208 16.206 secs ago sensor:m_leakdetect_voltage(volts)=2.48824786324786 134.945 secs ago sensor:m_leakdetect_voltage_forward(volts)=2.47771672771673 134.91 secs ago sensor:m_leakdetect_voltage_science(volts)=2.47918192918193 134.875 secs ago sensor:m_tot_num_inflections(nodim)=42162 1e+308 secs ago sensor:m_vacuum(inHg)=8.84058334554335 3.763 secs ago sensor:m_water_vx(m/s)=0 1e+308 secs ago sensor:m_water_vy(m/s)=0 1e+308 secs ago sensor:u_alt_min_depth(m)=2 1e+308 secs ago sensor:u_min_water_depth(m)=0 1e+308 secs ago sensor:u_reqd_depth_at_surface(m)=4 1e+308 secs ago sensor:u_use_current_correction(nodim)=1 1e+308 secs ago sensor:x_last_wpt_lat(lat)=3921.7292 1e+308 secs ago sensor:x_last_wpt_lon(lon)=-7412.5004 1e+308 secs ago ABORT HISTORY: total since reset: 2 ABORT HISTORY: last abort cause: MS_ABORT_OVERDEPTH ABORT HISTORY: last abort details: ABORT HISTORY: last abort time: 2021-02-08T20:46:01 ABORT HISTORY: last abort segment: ru34-2021-038-0-0 (0009.0000) ABORT HISTORY: last abort mission: od.mi GliderDos A 7 >209.46 No login script found for processing. GliderDos A 7 > GliderDos A 7 >put x_last_wpt_lat 3850.1148 309.66 70 sensor: x_last_wpt_lat = 3850.1148 lat GliderDos A 7 >put x_last_wpt_lon -7419.7601 317.31 74 sensor: x_last_wpt_lon = -7419.7601 lon GliderDos A 7 >where Vehicle Name: ru34 Curr Time: Mon Feb 8 20:49:51 2021 MT: 323 DR Location: 3921.721 N -7412.527 E measured 0.001 secs ago GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago GPS Invalid : 3930.528 N -7419.522 E measured 1e+308 secs ago GPS Location: 3921.720 N -7412.530 E measured 231.428 secs ago sensor:c_wpt_lat(lat)=0 1e+308 secs ago sensor:c_wpt_lon(lon)=0 1e+308 secs ago sensor:m_battery(volts)=16.3189304712992 0.131 secs ago sensor:m_coulomb_amphr(amp-hrs)=0.341256 0.226 secs ago sensor:m_coulomb_amphr_total(amp-hrs)=0.413756 0.23 secs ago sensor:m_depth(m)=0.005572511913239 0.043 secs ago sensor:m_digifin_leakdetect_reading(nodim)=1023 2.047 secs ago sensor:m_gps_mag_var(rad)=0.218166156499291 231.475 secs ago sensor:m_iridium_attempt_num(nodim)=0 16.975 secs ago sensor:m_iridium_call_num(nodim)=1649 114.588 secs ago sensor:m_iridium_dialed_num(nodim)=2208 130.737 secs ago sensor:m_leakdetect_voltage(volts)=2.48824786324786 249.476 secs ago sensor:m_leakdetect_voltage_forward(volts)=2.47771672771673 249.44 secs ago sensor:m_leakdetect_voltage_science(volts)=2.47918192918193 249.405 secs ago sensor:m_tot_num_inflections(nodim)=42162 1e+308 secs ago sensor:m_vacuum(inHg)=9.58127833943834 0.135 secs ago sensor:m_water_vx(m/s)=0 1e+308 secs ago sensor:m_water_vy(m/s)=0 1e+308 secs ago sensor:u_alt_min_depth(m)=2 1e+308 secs ago sensor:u_min_water_depth(m)=0 1e+308 secs ago sensor:u_reqd_depth_at_surface(m)=4 1e+308 secs ago sensor:u_use_current_correction(nodim)=1 1e+308 secs ago sensor:x_last_wpt_lat(lat)=3850.1148 14.308 secs ago sensor:x_last_wpt_lon(lon)=-7419.7601 6.664 secs ago GliderDos A 7 >zr Choosing console...using IRIDIUM 332.45 79 save_and_change_sensors().... Changed u_use_ctd_depth_for_flying from 0 to 0 Changed c_science_on from 1 to 0 332.46 save_and_change_sensors().... Changed c_science_printout from 0 to 0 Waiting for motors idle START **B0100000027fed4 Starting zModem transfer of goto_l10.ma to/from ru34 size is 919 Total Bytes sent/received: 919 zModem transfer DONE for file goto_l10.ma sending >goto_l10.ma< Sent archiving >/var/opt/sfmc-dockserver/stations/default/gliders/ru34/to-glider/goto_l10.ma< as >/var/opt/sfmc-dockserver/stations/default/gliders/ru34/archive/20210208T205017_goto_l10.ma< Successful deleting >/var/opt/sfmc-dockserver/stations/default/gliders/ru34/to-glider/goto_l10.ma< Successful 349.24 restore_sensors().... Restored u_use_ctd_depth_for_flying from 0 to 0 Restored c_science_on from 0 to 1 349.24 restore_sensors().... 349.25 restore_sensors().... Restored c_science_printout from 0 to 0 Done! GliderDos A 7 >Glider-Science software version match: 10.020000 Science hardware version is 3.000000 350.31 80 SCI:PROGLET house_elf begin() called 350.31 SCI: house_elf: Version 1.2 350.31 SCI:PROGLET ctd41cp begin() called 350.32 SCI: ctd41cp: Version 0.2 350.32 SCI: ctd41cp: Will be sending the following data to glider: 350.33 SCI: sci_water_cond(s/m) 350.33 SCI: sci_water_temp(degc) 350.34 SCI: sci_water_pressure(bar) 350.34 SCI: sci_ctd41cp_timestamp(timestamp) 350.35 SCI:PROGLET dmon begin() called 350.35 SCI: dmon: Version 0.0 350.36 SCI: dmon: Will be sending following data to glider: 350.36 SCI: sci_dmon_msg_byte_count(nodim) 350.37 SCI:PROGLET vr2c begin() called 350.37 SCI:PROGLET oxy3835_wphase begin() called 350.38 SCI: oxy3835_wphase: Version 0.4 350.38 SCI: oxy3835_wphase: Will be sending following data to glider: 350.39 SCI: sci_oxy3835_wphase_oxygen(nodim) 350.39 SCI: sci_oxy3835_wphase_saturation(nodim) 350.40 SCI: sci_oxy3835_wphase_temp(nodim) 350.40 SCI: sci_oxy3835_wphase_dphase(nodim) 350.41 SCI: sci_oxy3835_wphase_bphase(nodim) 350.42 SCI: sci_oxy3835_wphase_rphase(nodim) 350.42 SCI: sci_oxy3835_wphase_bamp(nodim) 350.43 SCI: sci_oxy3835_wphase_bpot(nodim) 350.43 SCI: sci_oxy3835_wphase_ramp(nodim) 350.44 SCI: sci_oxy3835_wphase_rawtemp(nodim) 350.44 SCI: sci_oxy3835_wphase_timestamp(timestamp) 350.45 SCI:Bit(2) raise count is now 0. 350.45 SCI:Bit(2) raise count is now 0. 350.56 SCI:PROGLET house_elf start() called 350.56 SCI: house_elf_run(): 0 error(s) in a row. (5 is fatal) 350.57 SCI: house_elf_run(): 0 error(s) since house_elf_begin(). (50 is fatal) 350.58 SCI:PROGLET vr2c start() called 350.58 SCI: vr2c_run(): 0 error(s) in a row. (5 is fatal) 350.59 SCI: vr2c_run(): 0 error(s) since vr2c_begin(). (50 is fatal) run shallow.mi Starting Mission: shallow.mi timestamp: Mon Feb 8 20:50:31 2021 load_mission(): Opening Mission file: shallow.mi Couldn't open mission file: shallow.mi timestamp: Mon Feb 8 20:50:31 2021 Mission completed ABNORMALLY, ret = -1 Mission end: grun_mission() shallow.mi ru34-2021-038-0-0 (0009.0000) GliderDos A 7 > not found>shallow2.mi< [dockzr | dockszr] [?][-v N][-nosmartdir][-f rf | irid][-cd dir][-noremove] [-archive] [-d ] ... [[-d ... ] ... ] zr Choosing console...using IRIDIUM 406.68 96 save_and_change_sensors().... Changed u_use_ctd_depth_for_flying from 0 to 0 Changed c_science_on from 1 to 0 406.69 save_and_change_sensors().... Changed c_science_printout from 0 to 0 Waiting for motors idle START **B0100000027fed4 Starting zModem transfer of shallow.mi to/from ru34 size is 4123 Total Bytes sent/received: 1024 Total Bytes sent/received: 2048 Total Bytes sent/received: 3072 Total Bytes sent/received: 4096 Total Bytes sent/received: 4123 zModem transfer DONE for file shallow.mi sending >shallow.mi< Sent archiving >/var/opt/sfmc-dockserver/stations/default/gliders/ru34/to-glider/shallow.mi< as >/var/opt/sfmc-dockserver/stations/default/gliders/ru34/archive/20210208T205142_shallow.mi< Successful deleting >/var/opt/sfmc-dockserver/stations/default/gliders/ru34/to-glider/shallow.mi< Successful 434.08 restore_sensors().... Restored u_use_ctd_depth_for_flying from 0 to 0 Restored c_science_on from 0 to 1 434.09 restore_sensors().... 434.09 restore_sensors().... Restored c_science_printout from 0 to 0 Done! GliderDos A 7 >Glider-Science software version match: 10.020000 Science hardware version is 3.000000 436.16 97 SCI:PROGLET house_elf begin() called 436.17 SCI: house_elf: Version 1.2 436.17 SCI:PROGLET ctd41cp begin() called 436.18 SCI: ctd41cp: Version 0.2 436.18 SCI: ctd41cp: Will be sending the following data to glider: 436.19 SCI: sci_water_cond(s/m) 436.19 SCI: sci_water_temp(degc) 436.20 SCI: sci_water_pressure(bar) 436.20 SCI: sci_ctd41cp_timestamp(timestamp) 436.21 SCI:PROGLET dmon begin() called 436.21 SCI: dmon: Version 0.0 436.21 SCI: dmon: Will be sending following data to glider: 436.22 SCI: sci_dmon_msg_byte_count(nodim) 436.23 SCI:PROGLET vr2c begin() called 436.23 SCI:PROGLET oxy3835_wphase begin() called 436.23 SCI: oxy3835_wphase: Version 0.4 436.24 SCI: oxy3835_wphase: Will be sending following data to glider: 436.25 SCI: sci_oxy3835_wphase_oxygen(nodim) 436.25 SCI: sci_oxy3835_wphase_saturation(nodim) 436.26 SCI: sci_oxy3835_wphase_temp(nodim) 436.26 SCI: sci_oxy3835_wphase_dphase(nodim) 436.27 SCI: sci_oxy3835_wphase_bphase(nodim) 436.27 SCI: sci_oxy3835_wphase_rphase(nodim) 436.28 SCI: sci_oxy3835_wphase_bamp(nodim) 436.29 SCI: sci_oxy3835_wphase_bpot(nodim) 436.29 SCI: sci_oxy3835_wphase_ramp(nodim) 436.30 SCI: sci_oxy3835_wphase_rawtemp(nodim) 436.30 SCI: sci_oxy3835_wphase_timestamp(timestamp) 436.31 SCI:Bit(2) raise count is now 0. 436.31 SCI:Bit(2) raise count is now 0. 436.42 SCI:PROGLET house_elf start() called 436.42 SCI: house_elf_run(): 0 error(s) in a row. (5 is fatal) 436.43 SCI: house_elf_run(): 0 error(s) since house_elf_begin(). (50 is fatal) 436.43 SCI:PROGLET vr2c start() called 436.44 SCI: vr2c_run(): 0 error(s) in a row. (5 is fatal) 436.44 SCI: vr2c_run(): 0 error(s) since vr2c_begin(). (50 is fatal) consci GLD: science IS running Choosing console...using IRIDIUM CONSCI REQUESTED (using IRIDIUM as console) GliderDos A 7 >ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s 444.05 0 Neutering the Freewave Console SciDos>cd c:/config c:/config SciDos>dir Directory of c:/config/ ./ ../ ad2cp.cfg 826 2020-09-24 14:27:00 ad2cp.ini 4766 2020-09-24 14:27:00 appcmd.dat 12 2020-09-24 14:27:00 azfp.cfg 1464 2020-09-24 14:27:00 azfp.ini 2309 2020-09-24 14:27:00 c3sfl.ini 1785 2020-09-24 14:27:00 dellog.dat 541 2020-09-24 14:27:00 dvl.ini 1290 2020-09-24 14:27:00 echo853.ini 3899 2020-09-24 14:27:00 echodrd.ini 2537 2020-09-24 14:27:00 highdens.dat 585 2020-09-24 14:27:00 lisst.cfg 815 2020-09-24 14:27:00 lisst.ini 1934 2020-09-24 14:27:00 lms.ini 1557 2020-09-24 14:27:00 nbdlist.dat 2087 2000-01-01 00:05:58 obsvr.ini 2369 2020-09-24 14:27:00 proglets.dat 2117 2000-01-01 00:06:00 sbe41nph.ini 1825 2020-09-24 14:27:00 suna.ini 3738 2020-09-24 14:27:00 tau.ini 1952 2020-09-24 14:27:00 tbdlist.dat 1409 2021-01-28 21:13:22 uRider.cfg 1629 2020-09-24 14:27:00 uRider.ini 2953 2020-09-24 14:27:00 VR2C_CFG.0 1707 2021-01-26 21:38:28 VR2C_CFG.1 1709 2021-01-26 21:32:58 wetlabsA.ini 2149 2020-09-24 14:27:00 wetlabsB.ini 2149 2020-09-24 14:27:00 wetlabsC.ini 2149 2020-09-24 14:27:00 zmext.dat 621 2020-09-24 14:27:00 original/ 32 files SciDos>type vr2c_cfg.0 # This is a sample configuration file for the Vemco VR2C Device 0 # # This configuration file is used to configure the Serial number of the device # the profile type and the status interval and takes the format: # : # where: # can be SERIAL_NUMBER, PROFILE_TYPE or STATUS_INTERVAL # and: # depends on the attribute type. # # 12-28-12 fmarcelino@teledyne.com Initial # 2019-12-23 mbrissette@teledyne.com Mantis 5305: VEMCO Rx-Live support (vr2c proglet) # This configuration file is for device serial number 457001 SERIAL_NUMBER: 457001 # The INTERFACE_TYPE attribute tells the proglet the device interface, # different interfaces require different message types. # Valid values for INTERFACE_TYPE attribute are: # 0 - RS-232 # 1 - RS-485 INTERFACE_TYPE: 1 # RS-485 # The POWERUP_SECS attribute tells the proglet how long to wait before # sending messages to the device # Default value is 15 seconds for vr2c, 30 seconds for Rx-Live POWERUP_SECS: 30 # The PROFILE_TYPE attribute defines how the VEMCO is to do it's profiling. # Valid values for PROFILE_TYPE attribute are: # 0 - Real-Time Mode # 1 - Block Mode # 2 - Polled Mode # Refer to the Teledyne Webb Vemco VR2C Proglet Users Manual for details on each mode. PROFILE_TYPE: 0 # Real-Time Mode # The STATUS_INTERVAL defines how frequently the VEMCO VR2C will scan for tags. # The units for this attribute are in seconds. # The value of the STATUS_INTERVAL attribute has a slightly different meaning # depending on the value of the PROFILE_TYPE attribute. Refer to the Teledyne Webb # Vemco VR2C Proglet Users Manual for details. STATUS_INTERVAL: 10 # seconds SciDos> GliderDos A 7 > GliderDos A 7 > Parse error: Command not found SciDos>zr START **B01 Starting zModem transfer of vr2c_cfg.0 to/from ru34 size is 1226 Total Bytes sent/received: 1024 Total Bytes sent/received: 1226 zModem transfer DONE for file vr2c_cfg.0 sending >vr2c_cfg.0< Sent archiving >/var/opt/sfmc-dockserver/stations/default/gliders/ru34/to-glider/vr2c_cfg.0< as >/var/opt/sfmc-dockserver/stations/default/gliders/ru34/archive/20210208T205417_vr2c_cfg.0< Successful deleting >/var/opt/sfmc-dockserver/stations/default/gliders/ru34/to-glider/vr2c_cfg.0< Successful Done! vr2c_cfg.0 Parse error: Command not found SciDos>type vr2c_cfg.0 # This configuration file is for device serial number 457001 SERIAL_NUMBER: 457001 # The INTERFACE_TYPE attribute tells the proglet the device interface, # different interfaces require different message types. # Valid values for INTERFACE_TYPE attribute are: # 0 - RS-232 # 1 - RS-485 INTERFACE_TYPE: 1 # RS-485 # The POWERUP_SECS attribute tells the proglet how long to wait before # sending messages to the device # Default value is 15 seconds for vr2c, 30 seconds for Rx-Live POWERUP_SECS: 30 # The PROFILE_TYPE attribute defines how the VEMCO is to do it's profiling. # Valid values for PROFILE_TYPE attribute are: # 0 - Real-Time Mode # 1 - Block Mode # 2 - Polled Mode # Refer to the Teledyne Webb Vemco VR2C Proglet Users Manual for details on each mode. PROFILE_TYPE: 0 # Real-Time Mode # The STATUS_INTERVAL defines how frequently the VEMCO VR2C will scan for tags. # The units for this attribute are in seconds. # The value of the STATUS_INTERVAL attribute has a slightly different meaning # depending on the value of the PROFILE_TYPE attribute. Refer to the Teledyne Webb # Vemco VR2C Proglet Users Manual for details. STATUS_INTERVAL: 600 # seconds SciDos>quit Returning from SciDos 617.82 41 Freewave console restored REVERTING FROM SCIENCE COMMAND MODE SCIENCE COMMAND MODE TERMINATED because: Science Program QUIT (cts lowered) GliderDos A 7 >619.61 42 BAD LINE from science:C"183.00 bad type character 115 619.61 DRIVER_ODDITY:science_super:1805:BAD LINE from science: not found>*.ma< [dockzr | dockszr] [?][-v N][-nosmartdir][-f rf | irid][-cd dir][-noremove] [-archive] [-d ] ... [[-d ... ] ... ] Vehicle Name: ru34 630.95 44 GliderDos: No keystroke heard for 180 seconds 420 seconds to go before running:SEQUENCE -resume_next GliderDos A 7 >put c_science_on 0 635.91 47 sensor: c_science_on = 0 bool GliderDos A 7 >put c_science_on 1 638.41 49 sensor: c_science_on = 1 bool GliderDos A 7 >Glider-Science software version match: 10.020000 Science hardware version is 3.000000 639.46 50 SCI:PROGLET house_elf begin() called 639.46 SCI: house_elf: Version 1.2 639.47 SCI:PROGLET ctd41cp begin() called 639.47 SCI: ctd41cp: Version 0.2 639.48 SCI: ctd41cp: Will be sending the following data to glider: 639.48 SCI: sci_water_cond(s/m) 639.49 SCI: sci_water_temp(degc) 639.49 SCI: sci_water_pressure(bar) 639.50 SCI: sci_ctd41cp_timestamp(timestamp) 639.50 SCI:PROGLET dmon begin() called 639.51 SCI: dmon: Version 0.0 639.51 SCI: dmon: Will be sending following data to glider: 639.52 SCI: sci_dmon_msg_byte_count(nodim) 639.52 SCI:PROGLET vr2c begin() called 639.52 SCI:PROGLET oxy3835_wphase begin() called 639.53 SCI: oxy3835_wphase: Version 0.4 639.53 SCI: oxy3835_wphase: Will be sending following data to glider: 639.54 SCI: sci_oxy3835_wphase_oxygen(nodim) 639.55 SCI: sci_oxy3835_wphase_saturation(nodim) 639.55 SCI: sci_oxy3835_wphase_temp(nodim) 639.56 SCI: sci_oxy3835_wphase_dphase(nodim) 639.57 SCI: sci_oxy3835_wphase_bphase(nodim) 639.57 SCI: sci_oxy3835_wphase_rphase(nodim) 639.58 SCI: sci_oxy3835_wphase_bamp(nodim) 639.58 SCI: sci_oxy3835_wphase_bpot(nodim) 639.59 SCI: sci_oxy3835_wphase_ramp(nodim) 639.59 SCI: sci_oxy3835_wphase_rawtemp(nodim) 639.60 SCI: sci_oxy3835_wphase_timestamp(timestamp) 639.60 SCI:Bit(2) raise count is now 0. 639.61 SCI:Bit(2) raise count is now 0. 639.71 SCI:PROGLET house_elf start() called 639.72 SCI: house_elf_run(): 0 error(s) in a row. (5 is fatal) 639.72 SCI: house_elf_run(): 0 error(s) since house_elf_begin(). (50 is fatal) 639.73 SCI:PROGLET vr2c start() called 639.73 SCI: vr2c_run(): 0 error(s) in a row. (5 is fatal) 639.74 SCI: vr2c_run(): 0 error(s) since vr2c_begin(). (50 is fatal) run shallow.mi Starting Mission: shallow.mi timestamp: Mon Feb 8 20:55:14 2021 load_mission(): Opening Mission file: shallow.mi Setting SENSOR c_science_send_all(bool) value 0.000000 Setting SENSOR c_science_all_on_enabled(bool) value 1.000000 Setting SENSOR u_dbd_sensor_list_xmit_control(enum) value 3.000000 Setting SENSOR u_sci_dbd_sensor_list_xmit_control(enum) value 2.000000 Vehicle Name: ru34 Curr Time: Mon Feb 8 20:55:14 2021 MT: 646 DR Location: 3921.721 N -7412.527 E measured 0.182 secs ago GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago GPS Invalid : 3930.528 N -7419.522 E measured 1e+308 secs ago GPS Location: 3921.720 N -7412.530 E measured 554.717 secs ago sensor:c_wpt_lat(lat)=0 1e+308 secs ago sensor:c_wpt_lon(lon)=0 1e+308 secs ago sensor:m_battery(volts)=16.3199569719017 0.312 secs ago sensor:m_coulomb_amphr(amp-hrs)=0.371248 0.407 secs ago sensor:m_coulomb_amphr_total(amp-hrs)=0.443748 0.411 secs ago sensor:m_depth(m)=0.741144084460175 0.224 secs ago sensor:m_digifin_leakdetect_reading(nodim)=1023 1.822 secs ago sensor:m_gps_mag_var(rad)=0.218166156499291 554.763 secs ago sensor:m_iridium_attempt_num(nodim)=0 340.263 secs ago sensor:m_iridium_call_num(nodim)=1649 437.876 secs ago sensor:m_iridium_dialed_num(nodim)=2208 454.025 secs ago sensor:m_leakdetect_voltage(volts)=2.48824786324786 572.764 secs ago sensor:m_leakdetect_voltage_forward(volts)=2.47771672771673 572.728 secs ago sensor:m_leakdetect_voltage_science(volts)=2.47918192918193 572.693 secs ago sensor:m_tot_num_inflections(nodim)=42162 1e+308 secs ago sensor:m_vacuum(inHg)=9.59635443223443 0.316 secs ago sensor:m_water_vx(m/s)=0 1e+308 secs ago sensor:m_water_vy(m/s)=0 1e+308 secs ago sensor:u_alt_min_depth(m)=2 1e+308 secs ago sensor:u_min_water_depth(m)=0 1e+308 secs ago sensor:u_reqd_depth_at_surface(m)=4 1e+308 secs ago sensor:u_use_current_correction(nodim)=1 1e+308 secs ago sensor:x_last_wpt_lat(lat)=3850.1148 337.596 secs ago sensor:x_last_wpt_lon(lon)=-7419.7601 329.952 secs ago start_alldevices() PARSED iridium_phone_data for datum# 0: =========== predial initialization cmds (from c:/config/iridinit.0): ATE AT+cbst=6,0,1 AT+CSQ dial string: ATD0088160000592