NO CARRIER RING CONNECT 4800/ARQ/V32/LAPM 10261 Iridium console active and ready... Vehicle Name: ru26d Curr Time: Fri Sep 27 19:34:29 2019 MT: 10260 DR Location: 3554.911 N -12510.569 E measured 50.343 secs ago GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago GPS Invalid : 3555.270 N -12508.806 E measured 118.794 secs ago GPS Location: 3554.911 N -12510.569 E measured 51.529 secs ago sensor:c_wpt_lat(lat)=3552.7618 10167 secs ago sensor:c_wpt_lon(lon)=-12524.7779 10167.1 secs ago sensor:m_battery(volts)=15.093366273194 4.95 secs ago sensor:m_coulomb_amphr(amp-hrs)=68.5709991455078 5.109 secs ago sensor:m_coulomb_amphr_total(amp-hrs)=70.2076251455842 5.13 secs ago sensor:m_depth(m)=0 5.077 secs ago sensor:m_digifin_leakdetect_reading(nodim)=1022 5.326 secs ago sensor:m_gps_mag_var(rad)=-0.240855436775217 52.068 secs ago sensor:m_iridium_attempt_num(nodim)=2 47.701 secs ago sensor:m_iridium_call_num(nodim)=2209 0.74 secs ago sensor:m_iridium_dialed_num(nodim)=3031 19.683 secs ago sensor:m_iridium_signal_strength(nodim)=5 19.736 secs ago sensor:m_leakdetect_voltage(volts)=2.4946275946276 51.321 secs ago sensor:m_leakdetect_voltage_forward(volts)=2.49148351648352 51.34 secs ago sensor:m_leakdetect_voltage_science(volts)=-1 5.676 secs ago sensor:m_tot_num_inflections(nodim)=14187 236.738 secs ago sensor:m_vacuum(inHg)=9.03711343101343 47.909 secs ago sensor:m_water_vx(m/s)=0.0926738946811378 84.362 secs ago sensor:m_water_vy(m/s)=0.0146302300910972 84.404 secs ago sensor:u_alt_min_depth(m)=900 1e+308 secs ago sensor:u_min_water_depth(m)=0 1e+308 secs ago sensor:u_use_current_correction(nodim)=1 1e+308 secs ago sensor:x_last_wpt_lat(lat)=3601.3285 1e+308 secs ago sensor:x_last_wpt_lon(lon)=-12445.2022 1e+308 secs ago ABORT HISTORY: total since reset: 2 ABORT HISTORY: last abort cause: MS_ABORT_USER_INTERRUPT ABORT HISTORY: last abort details: ABORT HISTORY: last abort time: 2019-09-05T19:09:36 ABORT HISTORY: last abort segment: ru26d-2019-247-3-2 (0011.0002) ABORT HISTORY: last abort mission: 1K_N.MI 10262 No login script found for processing. 10262 DRIVER_ODDITY:iridium:1719:xxx_ctrl() ran too long !zr -------------------------------- 10279 76 save_and_change_sensors().... Changed u_use_ctd_depth_for_flying from 0 to 0 Changed c_science_on from 1 to 0 10280 save_and_change_sensors().... Changed c_science_printout from 0 to 0 Waiting for motors idle START **B01000800275775 � 10299 restore_sensors().... Restored u_use_ctd_depth_for_flying from 0 to 0 Restored c_science_on from 0 to 1 10299 restore_sensors().... 10299 restore_sensors().... Restored c_science_printout from 0 to 0 Done! -------------------------------- 10300 behavior surface_2: ! succeeded:zr 10300 behavior surface_2: SUBSTATE 7 ->7 : After ! command, waiting for control-C to exit/resume Glider ru26d at surface. Because:nothing commanded [behavior surface_2 start_when = 1.0] MissionName:1K_N.MI MissionNum:ru26d-2019-269-1-0 (0023.0000) Vehicle Name: ru26d Curr Time: Fri Sep 27 19:35:13 2019 MT: 10305 DR Location: 3554.911 N -12510.569 E measured 93.882 secs ago GPS TooFar: 69696969.000 N 69696969.000 E measured 1e+308 secs ago GPS Invalid : 3555.270 N -12508.806 E measured 162.333 secs ago GPS Location: 3554.911 N -12510.569 E measured 95.066 secs ago sensor:c_wpt_lat(lat)=3552.7618 10210.5 secs ago sensor:c_wpt_lon(lon)=-12524.7779 10210.6 secs ago sensor:m_battery(volts)=15.093366273194 48.423 secs ago sensor:m_coulomb_amphr(amp-hrs)=68.5757446289062 2.813 secs ago sensor:m_coulomb_amphr_total(amp-hrs)=70.2123706289826 2.826 secs ago sensor:m_depth(m)=0 2.757 secs ago sensor:m_digifin_leakdetect_reading(nodim)=1022 2.97 secs ago sensor:m_gps_mag_var(rad)=-0.240855436775217 95.462 secs ago sensor:m_iridium_attempt_num(nodim)=2 91.075 secs ago sensor:m_iridium_call_num(nodim)=2209 44.095 secs ago sensor:m_iridium_dialed_num(nodim)=3031 63.024 secs ago sensor:m_iridium_signal_strength(nodim)=5 63.067 secs ago sensor:m_leakdetect_voltage(volts)=2.49334554334554 34.137 secs ago sensor:m_leakdetect_voltage_forward(volts)=2.49648962148962 34.15 secs ago sensor:m_leakdetect_voltage_science(volts)=-1 3.222 secs ago sensor:m_tot_num_inflections(nodim)=14187 280.034 secs ago sensor:m_vacuum(inHg)=9.53371825396825 29.564 secs ago sensor:m_water_vx(m/s)=0.0926738946811378 127.633 secs ago sensor:m_water_vy(m/s)=0.0146302300910972 127.667 secs ago sensor:u_alt_min_depth(m)=900 1e+308 secs ago sensor:u_min_water_depth(m)=0 1e+308 secs ago sensor:u_use_current_correction(nodim)=1 1e+308 secs ago sensor:x_last_wpt_lat(lat)=3601.3285 1e+308 secs ago sensor:x_last_wpt_lon(lon)=-12445.2022 1e+308 secs ago devices:(t/m/s) errs: 0/ 0/ 0 warn: 30/ 0/ 0 odd: 725/ 4/ 4 ABORT HISTORY: total since reset: 2 ABORT HISTORY: last abort cause: MS_ABORT_USER_INTERRUPT ABORT HISTORY: last abort details: ABORT HISTORY: last abort time: 2019-09-05T19:09:36 ABORT HISTORY: last abort segment: ru26d-2019-247-3-2 (0011.0002) ABORT HISTORY: last abort mission: 1K_N.MI Hit Control-R to RESUME the mission, i.e. dive! Hit Control-C to END the mission, i.e. GliderDos Hit Control-E to extend surface time by 5 minutes. Hit Control-W to get device warning reports. Hit Control-F to re-read yo, goto_l, surface, sample, drift_ mafiles. Hit H <0:1> to Hangup and call back in minutes at 0-primary 1-alternate number. Hit S [-f={rf}|{irid] [-num=] [-t=] [filespec ...] to send log files Hit ! to execute Hit Control-T to consci to science computer when comms ready: ... communications NOT ready for consci. ... because: sci_m_science_on = 0 Water Velocity Calculations waiting for final gps fix(ideally 23 secs) Waypoint: (3552.7618,-12524.7779) Range: 21749m, Bearing: 247deg, Age: 2:50h:m Time until diving is: 354 secs Glider-Science software version match: 8.300000 Science hardware version is 1.000000 10315 78 SCI:PROGLET house_elf begin() called 10315 SCI: house_elf: Version 1.2 10316 SCI:PROGLET ctd41cp begin() called 10316 SCI: ctd41cp: Version 0.2 10317 SCI: ctd41cp: Will be sending the following data to glider: 10319 80 SCI: sci_water_cond(s/m) 10319 SCI: sci_water_temp(degc) 10320 SCI: sci_water_pressure(bar) 10321 SCI: sci_ctd41cp_timestamp(timestamp) 10322 SCI:PROGLET house_elf start() called 10324 80 SCI: house_elf_run(): 0 error(s) in a row. (5 is fatal) 10326 SCI: house_elf_run(): 0 error(s) since house_elf_begin(). (50 is fatal) ^C 10339 83 behavior surface_2: User Hit a Control-C, terminating the mission 10339 behavior surface_2: STATE Active -> Mission Complete 10339 behavior ?_-1: layered_control(): Mission completed normally 10339 behavior ?_-1: run_mission(): Mission completed: MS_COMPLETED_NORMALLY(-1) Vehicle Name: ru26d Mission Name: 1K_N.MI Mission Number: ru26d-2019-269-1-0 (0023.0000) post_mission_cleanup(): End of Mission timestamp: Fri Sep 27 19:35:51 2019 10343 00230000.mlg LOG FILE CLOSED timestamp: Fri Sep 27 19:35:55 2019 Mission completed normally Mission end: grun_mission() 1K_N.MI ru26d-2019-269-1-0 (0023.0000) SEQUENCE: 1K_N.MI ru26d-2019-269-1-0 (0023.0000) completed normally ABORT HISTORY: total since reset: 2 ABORT HISTORY: last abort cause: MS_ABORT_USER_INTERRUPT ABORT HISTORY: last abort details: ABORT HISTORY: last abort time: 2019-09-05T19:09:36 ABORT HISTORY: last abort segment: ru26d-2019-247-3-2 (0011.0002) ABORT HISTORY: last abort mission: 1K_N.MI SEQUENCE: About to run 1K_N.MI on try 1 You have 120 seconds to type a control-C to terminate the sequence. The control-P character immediately starts the mission. All other characters are ignored. ^@ I heard a keystroke ('NUL'), but not the right one! There were no pending chars in input buffer to drain. ABORT HISTORY: total since reset: 2 ABORT HISTORY: last abort cause: MS_ABORT_USER_INTERRUPT ABORT HISTORY: last abort details: ABORT HISTORY: last abort time: 2019-09-05T19:09:36 ABORT HISTORY: last abort segment: ru26d-2019-247-3-2 (0011.0002) ABORT HISTORY: last abort mission: 1K_N.MI SEQUENCE: About to run 1K_N.MI on try 1 You have 120 seconds to type a control-C to terminate the sequence. The control-P character immediately starts the mission. All other characters are ignored. ^C Heard a Control-C, terminating the sequence GliderDos N -1 >send *.tbd SCIENCE DATA LOGGING: science IS running CONSCI REQUESTED (using IRIDIUM as console) ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s 10395 0 Neutering the Freewave Console SCI: Implicitly limiting total transfer to 1800 secs, representing 180 KB total size SCI: Enumerating and selecting files SCI: About to send 1 files Prechecking is not necessary for this invocation START **B0000 SHUFFLING FILES. SCI: Sent 1 file(s): c:\logs\00230000.TBD SCI: SUCCESS 10746 83 Freewave console restored REVERTING FROM SCIENCE COMMAND MODE SCIENCE COMMAND MODE TERMINATED because: Science Program QUIT (cts lowered) GLD: Enumerating and selecting files GLD: NO TRANSMISSION: the overall list of files is empty GliderDos N -1 > Vehicle Name: ru26d 10756 85 GliderDos: No keystroke heard for 0 seconds 600 seconds to go before running:SEQUENCE -resume_next GliderDos N -1 > GliderDos N -1 >get u_max_time_in_gliderdos = 600.000000 sec GliderDos N -1 > GliderDos N -1 >cd logs error code -1 GliderDos N -1 >cd c:\logs \LOGS GliderDos N -1 >dir *.sbd Volume in drive C is RU26D Volume Serial Number is 420C-06A3 Directory of C:\LOGS\ 00230000.SBD 7,189 09-27-19 7:35p 1 file(s) 7,189 bytes 0 dir(s) 1,825,505,280 bytes free GliderDos N -1 >send *.sbd SCIENCE DATA LOGGING: science IS running CONSCI REQUESTED (using IRIDIUM as console) ASKING SCIENCE COMPUTER TO SWITCH TO COMMAND MODE via IRIDIUM SWITCHING TO SCIENCE COMMAND MODE over IRIDIUM Normal operation resumes when: SciDos> QUIT -or- Lose CD (unplug freewave/hangup iridium) -or- run longer than U_SCI_CMD_MAX_CONSCI_TIME(3600)s 11029 60 Neutering the Freewave Console SCI: Implicitly limiting total transfer to 1800 secs, representing 180 KB total size SCI: Enumerating and selecting files SCI: NO TRANSMISSION: the overall list of files is empty 11031 Freewave console restored REVERTING FROM SCIENCE COMMAND MODE SCIENCE COMMAND MODE TERMINATED because: Science Program QUIT (cts lowered) GLD: Enumerating and selecting files GLD: About to send 1 files Prechecking is not necessary for this invocation 11033 save_and_change_sensors().... Changed u_use_ctd_depth_for_flying from 0 to 0 Changed c_science_on from 1 to 0 11033 save_and_change_sensors().... Changed c_science_printout from 0 to 0 Waiting for motors idle START **B00000000000000 �ed u_use_ctd_depth_for_flying from 0 to 0 Restored c_science_on from 0 to 1 11090 restore_sensors().... 11090 restore_sensors().... Restored c_science_printout from 0 to 0 SHUFFLING FILES. GLD: Sent 1 file(s): c:\logs\00230000.SBD GLD: SUCCESS Glider-Science software version match: 8.300000 Science hardware version is 1.000000 11097 62 SCI:PROGLET house_elf begin() called 11097 SCI: house_elf: Version 1.2 11098 SCI:PROGLET ctd41cp begin() called 11098 SCI: ctd41cp: Version 0.2 11098 SCI: ctd41cp: Will be sending the following data to glider: 11098 SCI: sci_water_cond(s/m) 11098 SCI: sci_water_temp(degc) 11098 SCI: sci_water_pressure(bar) 11098 SCI: sci_ctd41cp_timestamp(timestamp) 11101 62 SCI:PROGLET house_elf start() called 11101 SCI: house_elf_run(): 0 error(s) in a row. (5 is fatal) 11101 SCI: house_elf_run(): 0 error(s) since house_elf_begin(). (50 is fatal) GliderDos N -1 > Vehicle Name: ru26d 11103 NOTE:GPS fix is getting stale: 894 secs old Vehicle Name: ru26d 11103 GliderDos: No keystroke heard for 0 seconds 600 seconds to go before running:SEQUENCE -resume_next GliderDos N -1 >**^XB0800000000022d Bad command or file name GliderDos N -1 >DEL**^XB0800000000022d Bad command or file name GliderDos N -1 >DEL Bad command or file name GliderDos N -1 > GliderDos N -1 > GliderDos N -1 >callback 1 0 I am going to hangup the Iridium! I will call you back in 1 minutes at the primary number ( 88160000592 ) GliderDos N -1 > 11309 17 disabling Iridium console...