Fleet Configurations
Deployments
Gliders
Projects
Payload Bays
Instruments
Users
API
Log In
Deployment ru34-20201003T1821
Pilot Notes
Set optode sampling interval (on optode itself) to 8 sec - was 4 sec - to see if it will help with power savings. verified that this did not cause errors on the glider by doing loadmission ctdon.mi, put c_oxy3835_wphase_on 1, and verified we got optode data every 8 seconds. *note Ctrl-J doesn't work as normal - 'Ctrl-J' must be typed out. Use the following commands to do make optode changes through sfmc - worked in regular terminal, didn't need to do it in the port terminal. May need to issue commands a few times for them to go through. consci uart j1 9600 2 get_all Ctrl-J Ctrl-J set_protect(1) Ctrl-J Ctrl-J set_Interval(8) Ctrl-J Ctrl-J save Ctrl-J Ctrl-J get_all Ctrl-J Ctrl-J
Category
Informational
Alert
Action Needed
Action Taken
Operations
Update
Credentials Required
Username
Password