Glider Project Deployed Recovered Days Distance Start/
End Voltage
Air Time POC Notes Payload KMZs Data Metadata
ru05-471 LTER 2016-02-02
20:23 GMT
23:44 GMT
15.14 301.6
14.96 Volts
11.60 Volts
Haldeman 11 ? kmzs

deployment Notes (11)  

Select Category: Deployment Glider All

2016-02-18 17:15 GMT
deployment Recovered by Mike Brown out of Palmer Station
2016-02-14 04:15 GMT
deployment .tbd transfers ridiculously slow. Catching up file transfers manually every so often. :-(

Consci, send all .tbd's, back out and send .sbd's with a couple ctrl-E's seems to work. Otherwise file transfer practically hangs and glider disconnects, and files continue to back log.
2016-02-11 13:34 GMT
deployment Berg?
2016-02-10 21:44 GMT
deployment u_alt_min_depth 2 on next surfacing via script. No need to worry about false hits here...and would like to avoid bottom sampling.
2016-02-05 15:07 GMT
deployment ru05 possibly mauled this segment:

DBD analysis post mission would be great
2016-02-04 21:43 GMT
deployment bpump at -205 for dive, +175 for climb. Slowing it down to conserve energy.
2016-02-04 21:40 GMT
2016-02-04 21:44 GMT
deployment 2s sampling seems to have taken care of science overloading. CDOM puck looks like it might be bad though.

Switching to 25 m satisfying radius and 1 hour missions for box/station keeping around midpoint.

100_n.mi - no waypoint surfacing
2016-02-03 22:19 GMT
deployment Looks like science was overloaded, so sampling for optics backed off to 2 seconds. No PI input, so changed tbd to 6 seconds coming back to lower file sizes a bit.
2016-02-02 23:28 GMT
deployment Going to full depth and 2 hour missions on next surfacing. Needs tbdlist adjustment once PI input is received as filesizes are large.
2016-02-02 20:28 GMT
deployment Deployed off Station E by Mike Brown & crew. Some initial GPS issues (failure to update) caused some lengthy delays, but all seems fine now. Starting off on a cross canyon transect; currently 1 hr missions to 50 m; will adjust on next few surfacings.
2015-09-10 19:34 GMT
configuration ru05 with SB 0080 configured for CONVERGE/LTER 2014/2015 had the wrong calibration coefficients in the autoexec.mi file. See note below:
# 2015/09/10 SB0080 was placed in glider for LTER(CONVERGE) 2014/2015 season. This payload has pucks BBFL2-337 and BB3-335
# The calibration coeffcients in the autoexec during those missions was for pucks BB3SLO-648 and BB2FLS-666
# 748, and 666 were associated with SB 0175 for California UCSB
# Changed coeffcients in autoexec.mi to the correct pucks, BBFL2-337 and BB3-335
# Changed ballast pump deadz width from 30 to 15 cc