| The default list of In-View satellite passes
will include passes occurring at the local receiving site over a 1-day period, starting at
00:00 GMT on the current day's date. You can, however, specify a
different time period, different satellites, or another receiving site, or change other
criteria that TeraCapCon uses to generate the list of In-View passes. You do this from the
In-View Search Criteria dialog box.
To call up the In-View Search Criteria dialog box,
select In-View Search Criteria from the Search menu of
the TeraCapCon Main Window.
To save the search criteria you set on the In-View Search
Criteria dialog box, click on the Accept button
at the bottom of the dialog box. The dialog box will close.
If an In-View pass list is being displayed in the TeraCapCon Main
Window, the passes you specified will appear on it; each pass will be indicated by a V in
the Status field of the list.
If no pass list is being displayed or if there are no In-View passes on
a list being displayed, turn on the In-View Pass Filter at the top of the
TeraCapCon Main Window. You should then see the In-View passes you specified from the In-View
Search Criteria dialog box.
|
|
Search Criteria for Polar-Orbiting
Satellites Selecting
the Satellites
Specifying Pass-Selection Criteria
Specifying a Time
Period for Passes
Selecting an Alternate Receiver Site
Search Criteria for Geostationary Satellites
Selecting the Satellites
Selecting Image
Scans from a Schedule
Take me to the index
Copyright ©1997-2000 SeaSpace Corporation. All Rights Reserved
Last Update: $Date: 2000/01/27 23:06:18 $ |